Question about 1993 Jeep Grand Cherokee

1 Answer

How to Replace a Broken Turn Signal Assembly on a jeep

Posted by on

  • ZJ Limited
    ZJ Limited May 11, 2010

    What is your Jeep model? Maybe this info can be help us.

  • bob collins
    bob collins May 11, 2010

    Is it the whole signal or just the handle

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine did the same thing what i did was changed out the whole colem

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

1 Answer

Replacing a turn signal bulb....Baffled...Thanks


Hello,

Please do not be baffled. To replace the turn signal bulb on Your car is quite simple, all You need to do is to get a screwdriver and follow the steps below:
  1. Open the hood and locate the mounting screws for the outboard marker-light assembly just above the light. Remove the screws with a Phillips screwdriver, then remove the assembly, setting it aside for now.
  2. Locate the two mounting screws on top of the turn-signal light assembly under the side-marker lens. Remove the two screws with a Phillips screwdriver, then set the screws aside. Slide the turn signal out and locate the socket on the back of the assembly.
  3. Rotate the bulb socket counterclockwise and pull the socket out of the assembly. Pull the bulb straight out of the socket and discard it. Install a new bulb into the socket, pushing it in until is seats. Position the socket back into the rear of the light assembly, turn it clockwise to lock it in place, then slide the assembly back into the front of the Jeep.
  4. Install the mounting bolts that secure the turn-signal light assembly, tightening the screws with a Phillips-head screwdriver. Position the side marker-light assembly to the side of the Jeep and install the retaining bolts.
  5. Tighten the retaining bolts for the side-marker lights with a Phillips screwdriver, then close the hood. Test the repair by turning the lights on and visually verify that the light is working..
Hope this helped. Thank You for using FixYa!!!

Jan 28, 2011 | 1998 Jeep Grand Cherokee

1 Answer

How do i replace my front turn signal bulb


open hood. you will see 7mm bolt. take out now should be able to pull the hole light assembly out. pull hard. there should be 5 or 6 bulbs. if you're looking down with the wires still attached to the assembly then they will be toward the base of the assembly(should be 2 of them)

Sep 07, 2010 | 2004 Jeep Grand Cherokee

1 Answer

My 2001 jeep wrangler turn signal not working. They will work if i manually hold the turn signal. Is this a fuse?


no, there's a cam in the turn signal switch which keep the signal work until you turn the wheel to cancel, evidently that cam is broken.

Feb 24, 2010 | 2001 Jeep Wrangler

2 Answers

Having problems with my turn signals, they do not work when i just click the turn signal, I have to hold them in a specific way for them to come on.


step by step heres what you got to do
1.disconnect battery ground cable
2.remove nut retainer and jam nuts hten steering wheel
3.remove turn signal cancel cam assembly
4.remove hazard warning screw and knob
5.move the turn signal switchso you can access the turn signal screws and housing screws which can be accessed through the opening in the switch
6.remove housing screws and housing
7.only on models with tilt steering wheels remove shoe pin retainer cap
8.remove pivot switch screw and pivot pluse switch assembly
9.remove turn signal screws
10.remove wire prtecting from opening in instrument panel bracket assemblyand seperate from wires
11.disconnect turn signal switch connector from ignition and dimmer switch assembly connector
12.disconnect 17 wy lock from turn signal connector
13.use ternimnal tool #j-35689-a or equivelent, disconnect wires on buzzer switch assemble from turn signal connector
14.remove turn signal switch assembly from column
15 reverse to put back together
16. please note that signal and column housing screws got to be torqued to 35 inch lbs the switch screws at 20 inch lbs hazards at 7 inch lbsand the jam nuts at 30 ft lbs

Nov 21, 2009 | 1992 Pontiac Grand Prix

1 Answer

88 Jeep comanache steering assembly


If it is the old fassion turn signal switch,then the flat part fits into the rectangled slot on the turn signal switch.This is the turn signal arm you are talking about I think.The screw with the larger round phillips head is the one that holds it down.

Oct 29, 2009 | 1988 Jeep Comanche

1 Answer

2001 jeep wrangler sport ,fog lights on, switch off


I have a simular problem. Only mine does not some on. I tried to replace the turn signal switch assembly with a used one. The replacement work ok on the fog lights but the rest was bad. As near as I can figure it, the switch assemble is not well made and had many ways to go bad. Either replace the whole assemble or wire in a bipass switch. I am going to go with a bipass switch. I don't trust the new jeep products.

Jun 25, 2009 | 2001 Jeep Wrangler

1 Answer

2002 jeep grand cherokee v8 ltd signal won't turn off


most likely a broken turn signal switch assem.
- Rudy

Mar 28, 2009 | 2002 Jeep Grand Cherokee

2 Answers

2004 JEEP WRANGLER TURN SIGNAL


replace all bulbs on that side,or check for broken ground wires.

Aug 04, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...