Question about 2000 Chevrolet Tracker

1 Answer

Had a bad coil

Changed coil on no i plug how do i clear code for services eng soon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

The cheap way is just unhook the battery for about 15 mins then it should be off

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why am I getting code # P 0308


I have your vehicle as a 97 Ford Expedition...Is this correct? Reason I ask is that Ford uses Coil-On-Plug and you said "I changed the wires"...Which would mean all eight coils were changed...P0308 is telling you the ECM is seeing a fault on cylinder #8...I would strongly suspect a bad coil for that cylinder...Question; Did you change all eight coils? If not change #8...saailer

May 30, 2014 | 1997 Ford Expedition

1 Answer

What is the circute #2 a code p1305


you have a misfire on cylinder # 2, check your plugs, if ok swap coils clear eng lite, run vehicle until check eng. lite comes back if code changes to a dirferent cylinder then you have a bad coil, if same code repeats then you need an injector, good luck.

Jul 05, 2012 | 2001 Toyota Echo

1 Answer

Car keeps giving p0303 code.


Code P0303 means that there is a misfire detected on cylinder #3. This could becaused by anything from a worn out spark plug to a blown cylinder head gasket, a faulty fuel injector, a bad ignition coil, or a leaking intake manifold gasket. I have also seen this type of code caused by clogged-up EGR ports in the intake manifold on certain engines. "Freeze Frame Data" stored in your Engine computer along with the fault code is designed to help identify what engine conditions (high speed/slow speed, heavy load/light load, etc.) are producing the misfire. This helps a lot in identifying exactly what is causing the cylinder to misfire.

One way to eliminate some of the possible causes is to swap parts with another cylinder to see if the code changes.

If you have "Coil-On-Plug" ignition, you can swap the coil on #3 cylinder with the coil on #4 Cylinder and swap the #3 spark plug with the #2 spark plug. Then clear the codes and drive the car till the Check Engine (or Service Engine Soon) light comes back on.

If it still gives you P0303, then it is not being caused by the plug or the coil. It could be any of the other possible causes listed above.
If it now gives you P304, replace the bad ignition coil that is now on #4 cylinder.
If it now gives you P302, Then replacement of all the spark plugs is recommended.

Dec 26, 2010 | Chrysler PT Cruiser Cars & Trucks

1 Answer

My 99 es300 has 240k on it and has been an amazing workhorse for me. it began jerking around today, and felt like an 02 sensor gone bad, it threw codes p0300b p0302 p0303 running real rough and...


cylinder 2&3 misfiring, inspect plugs if ok, mark and swap coil packs for known good ones clear codes, run eng brake torque it rev to cause missfire, repeat until check eng, lite comes on, recheck codes if changed cylinders replace coil packs if not, you have two bad injectors.

Sep 29, 2010 | 1999 Lexus ES 300

1 Answer

Skipping when floored 2000 lincoln lsv8


Are you getting a Service Eng Soon light? It is very common for the coils in these cars to go bad try to id the cyl at fault and try swapping coils if the miss follows change the coil

Jul 07, 2009 | 2002 Lincoln LS

2 Answers

Check Engine Light is on and the code is P0303


Hello I need a help.
I have 1999 lincoln town car 4.6L V8.They have check engine light on. P 0303 cylinder 3 missfire.
I was changed spark plugs,fuel filter. check compression test 150psi. fuel pressuer 50.
swiching cylinder 1 to 3 fuel injector and coil. but they still have engine code

Feb 27, 2009 | 1999 Lincoln Town Car

1 Answer

1995 Volvo 960 idles rough, Emission Control light on dash is on


Possible intake gasket leak causing a misfire, or plugs or coil causing a misfire. each cylinder has its own coil. You can hear the vaccuum leak with your ears under hood if gasket is bad. Check eng codes at advance auto prob for free. If it has misfire codes only, prob coil or plugs. If misfire with fuel trim, prob gasket.

Oct 23, 2008 | 1995 Volvo 960

Not finding what you are looking for?
2000 Chevrolet Tracker Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...