- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The brake lite could blink when the brake fluid goes too low, before you add fluid check to see what type you need could be dot 3 or dot 4. there might be two types of wiper blades cost between 30 and 90 dollars.
you can only get a replacement wiper blade from a hyundai dealer .because the centre pin is thicker than a normal blade and when you get a replacement all you do it just hold the plastic rear wiper housing and pull the old wiper blade out then push the new on back home and your done
Let the tube squirt washer fluid directly on the windscreen, if it does a poor job then you may have to make a flat nozzle. Your local auto house supply should have some small plastic Ts for coupling hoses, find one that fits, cut it long enough to be fastened to the wiper blade with black tape or epoxy, heat the end and flatten with a pin to make a small passage. Use a cheap pair of gloves and use your hand to flatten the softened plastic. The only McGyver trick I know for this!
You need to replace only the wiper blades which are attached to the wiper arm with a clip, simply press the clip and slide the old wiper blade out of the arm, looks like a "u" bend so you need to pull it down opposite the bend, then put in the new wiper blade in reverse way only you don't need to press the clip. Once you hear the click and the blade does not move in the arm, job is done.
either you go to the dealor and get a whole new arm wich is toyotas solution to the problem or you go to the auto parst store and ask them for 16 inch insert not a blade just an insert most stores will even instal it for you
Slide a small screwdriver under the tab in the middle of the blade and the arm, while pressing the tab in, pull blade away from the arm, this may need some extra wiggle. Remember you dont want it to fall off when driving..