Question about 2000 Audi A4

1 Answer

My A4 judders when shifting from first to second gear.  do I need a tune up.  Car has fairly new clutch..

Posted by on

  • 1 more comment 
  • jogledzins Jan 15, 2009

    yes, clutch/flywheel etc.

  • jogledzins Jan 16, 2009

    yes, usually hapens when shifting from a stand stillit's strange , it will drive great for a short distance, then when shifting it judders and the Malfunction light starts blinking,  The  light stays on.

  • jogledzins Jan 16, 2009

    what  is a thurst bearing?  Is this something that would have been replaced when the clutch/flywheel was replaced?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

It sounds like the thurst bearing is not working right. did you get a complete clutch?

Posted on Jan 14, 2009

  • alex murrell Jan 16, 2009

    you need to take it back to the garage and get the thurst bearing seen to, it sounds like the bearing is not moving correctly. Does it do it when setting off from stand still when releasing the clutch?

  • alex murrell Jan 17, 2009

    it comes with the clutch kit. the thurst bearing releases the clutch plate from the fly wheel.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my car judder on hard acceleration and not when driving normally?


check your clutch and fly wheel and if it is a diesel with a turbo if you have a bit of black smoke look at that aswell most likely the clutch dual mass fly wheel

Oct 14, 2014 | 2004 Audi A4

1 Answer

First and second gear roughwhen starting


If by rough you mean juddering when moving off, then it is a clutch and possibly flywheel problem. The gearbox will have to come out and the components checked and replaced as necessary.

If you mean it is a rasping sound then its more than likely a gearbox problem.

Apr 05, 2014 | 2005 Audi A4

1 Answer

Audi a4 1.9 tdi


Simple fix come by.

Feb 26, 2014 | Audi Cars & Trucks

1 Answer

Car juddering when foot off the accelerator Hyundai Amica


is it auto matic or shift . if shift its clutch judder oil on clutch plate

Nov 05, 2013 | Hyundai Cars & Trucks

1 Answer

Stick in 1st gear have to pull it hard all others are fine


Hi,
There two possibility of breakdown in that part, one is the cable might have loosen up and needs some adjustment in the shifting stick gear base. A local mechanic can adjust it and check why it become loose.
The second is, synchronizer gear failure. That part is inside the transmission, it is made of brass, and the gear teeth might have worn out. To check it, needs to pull down the whole transmission and opening it to check the gears. Replacing that gear is a must!
That gear broke down when somebody forcefully shifting the gear in first without the clutch assistant.
Forcing your car to start at 2nd gear from stop will wear down your clutch assembly, so be very carefull don't over rev the engine.
Hope that helps you.
Thanks for using FixYa!

Jul 12, 2011 | 2004 Audi A4

1 Answer

My 1995 sentra shifts fine in all gears but when i accelerate in 4th or 5th gear it the rpms wind up and the car doednt real respond feels like its in the accelerater do i need a new clutch


Sounds like the clutch is slipping. If the clutch is bad, it will slip in high gears (4th & 5th) but seem to work fine in lower gears. Clutch probably needs replaced but have a mechanic check it out first because it's a fairly expensive job. If your clutch is actuated via a cable (not hydraulic), it may just need adjusting.

Dec 10, 2010 | Nissan Sentra Cars & Trucks

1 Answer

2000 A4: notchy gear change when the engine is hot


Check the gearbox oil - has this been changed (with the wrong grade) just before the problem started ? May also be too little oil, from a small leak - which will get very thin when then inevitably overheating. Best to change the gearbox oil, note if lots of sludge or debris comes out (or is attached to the drain plug). If oil is the problem, total siezure may be just down the road.

Sep 07, 2009 | 1997 Audi A4

1 Answer

DIFFICULTY ENGAGING SECOND GEAR


the transmission needs to be taken apart and have the second gear synchro replaced. i would start with just have BG sychro shift put in at a local shop that sells BG. that will help with the problem.

Jan 17, 2009 | 1999 Audi A4

1 Answer

Malfunction function indicator lamp


all else being equal.. the last work disturbed something..check wiring on around or near transmission and clutch areas... loose ground a likely suspect here.....good luck

Jan 13, 2009 | 2000 Audi A4

Not finding what you are looking for?
2000 Audi A4 Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13228 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...