Question about 1995 Toyota Corolla

1 Answer

Engine struggling when in drive with ac on

When the ac is on and the engine is in drive it starts to stuggle does not shut off just vibrate heavily. in park this does not happen it is a 1995 toyota corolla from japan. i have heard that it may be a airflow problem.

Posted by on

  • 1 more comment 
  • Anonymous Jan 16, 2009

    not i accelerate ok. only when i stop i notice that even with the ac off it struggles the engine check light comes on as well some times

  • toyotagal May 22, 2009

    Car shakes (sometimes stops entirely) when AC or Heat on. Even if not on, car will stall.

  • john milligan May 11, 2010

    is the car doing this when you try to accelerate? if so, this may be an issue (that I have seen on other vehicles but not on a toyota {YET!})
    there is (on some cars w/AC) a solenoid that disengages the AC when in passing gear and lets it turn back on after you down shift back to normal. if that is when it is happening, then have a tech test the solenoid.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 21,949 Answers

Remove head and regrind valves to restore compression

Posted on Jan 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota Camry engine vibrate on stop,and shutting off


check engine mounts there mite be a loose or broken one, works fine while driving but is a problem when starting and stopping

Aug 16, 2014 | 2004 Toyota Camry

1 Answer

Misfiring cylinders


motor mounts may be worn--also a tuneup with new plug wires and boots/maybe injector or throttlebody cleaning

Sep 11, 2013 | Cars & Trucks

1 Answer

Chat rooms


Try to check your spark plug or your starter maybe need to repair or change.

Jul 01, 2013 | Hyundai Elantra Cars & Trucks

1 Answer

Altima engine shaking


AC compressor put load on engine causing engine shake vibrate.but check make sure AC compressor mounting bolts tight and drive belt correct tension.now if AC compressor very old most time bad compressor cause more load on engine causing shaking real bad.

May 23, 2013 | Cars & Trucks

1 Answer

Hyundai Excel X3 / Accent X3 has trouble starting, a lot of vibrating and shaking.


This is starting to sound very much like a blocked catalytic converter on the exhaust system. Try unbolting the exhaust in front of the catalytic unit and see if it will start and run normally. If it does then the unit needs replacing, if not then thats me tapped out for ideas.

Dec 30, 2012 | 1999 Hyundai Accent

1 Answer

02 chevy trailblazer Vibration


oh,, we'll need some more information to be able to help, The thing is you didnt specify what vibrates for example when you start and you have vibrations while idiling, while in drive and the engine kicks back rough when changing gears more than likely its and engine mount thats bad. if its vibrating while idling its the fuel rpm ration (idling screw that needs adjusted or the MAP or air sensor if its fuel injected).. If its vibrating while the ac is turned on, check the ac step-up solenoid (the switch that increases the idling speed to match the ac's needed power.) we'll love to help or point you in the right direction but we'll need some more information. Describe whats happening for us , because we cant be there in person to actually experience it our selves. If you have a vid of the engine while vibrating etc all of that will be beneficial.

Dec 27, 2012 | Cars & Trucks

1 Answer

The problem is engine vibration during start and shut down only


I think the catalytic converter ceramic matrix brick is broken up and that is the source of the vibration and noise.d

Nov 04, 2012 | 2004 GMC Envoy

2 Answers

My car vibrates,but dont when i have the a/c off


this means that your idle when the aircon is off is very low. basically there are 2 adjustments for idle: engine idle and aircon idle. just try to locate this screws in your engine. set the engine idle at 700-800rpm, while the aircon idle at 900-1000rpm.

Aug 05, 2011 | 1996 Ford Crown Victoria

1 Answer

I pressed the pedal enough to increase speed, but not enough to cause the tranny to downshift and I can feel what seems like the shudder of an engine struggling to pull the truck up to speed.


either low transmission fluid or?? plugged catalydic converter- if no top end or stuggling at high speed is usually cat or maybe as simple as a dirty/plugged fuel filter

May 10, 2011 | 1990 GMC Sierra

3 Answers

1994 Nissan Altima shakes while idling


Broken or worn out engine mounts will cause allot of engine vibration in drive at idle, reverse also, change all 4 the mounts, not just the 2 broken ones. As far as slow acceleration no mounts will not cause that, Have you reached the 100,000 mile recommended tune up? have you ever replaced the fuel filter, this is required every 30,000, let me know.

Nov 26, 2008 | 1994 Nissan Altima

Not finding what you are looking for?
1995 Toyota Corolla Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...