Our Dodge Intrepid was broken into and they tried to steal it. They took off the covering to the stearing column (the but the wires seem to be in tack) and must have tried to force a screw driver into the ignition. Either way the key does not even go in anymore b/c the ignition is so badly messed up. I don't want to take this to a mechanic if it is something I can do myself. What do you recommend?
Hey all you do is go down to like napa or autozone and tell them u need the complete ignition switch and the diagram to install it and then you are set. you dont need any special tool to do this or anything.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Robert, I'm glad to help. Here's how to remove and replace the Ignition Switch on your 2003 Dodge Intrepid. FIRST: remove the steering wheel shaft covers that rest over your ignition swtch. Once the covers are removed you now have access to the screws that hold the ignition switch in place. NOW: unplug the electrical connector, then take out the screws that hold it in place. NEXT: You'll need to turn the key to the proper position to release the switch while pulling the switch backward. Once its out install the new one and your done. Hope this helps and have an awesome day Robert.
whats left of the key cylinder? Is it still in place? if it is or isn't... if you can turn it with a flat head screw driver to the "start" position then your in good shape. Chances are you have a transponder chip (a theft deterrent, probably why they weren't able to steal your car) built into you key... try to crank it with the screwdriver and place (the top of) your key near the cylinder so it can pick up the signal. as for replacing the cylinder... that's a bit more tricky, i would bring it to a dealership and try to get your insurance to cover it....
try another auto glass shop. these tabs at the bottom are very common. BE AWARE, when taking off the old broken tabs off of the glass, there is always a chance of the glass breaking. then you would have to buy a new window. look for a company that has an address, a place that you can go for these types of problems.
Try replacing the fuse, on the 2004's the number 14 fuse supplies the sunroof and cluster (gauges), etc. Not sure if the number 14 fuse supplies the same things on your 2000 dodge but worth a try. If you have a manual it will tell you. This will more than likely be your problem if not let me know. To locate the #14 cavity remove the cover to the fuse box and look on the underside of the cover to find the location.
no you don,t to take it to a mechanic. my suggestion is take out the steering colum, and take it to a key person.
to take out the colum it will take you like 20 minutes or so.it not sure but you may need a ten and a fourteen,10&14