An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: need to change brake fluid
Open the bleeder on the right rear wheel and depress the brake pedal numerous times until all fluid is drained. Refill the master cylinder and then start the bleeding process. Bleed right rear, left rear, right front, and finally the left front. Be sure to keep an eye on the fluid level in the master cylinder as you dont want it to drain too far down.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You mean brake load sensor. Usually by the back axle. It spreads the braking evenly between front and rear brakes. When did you last change the brake fluid. It is hygroscopic(attracts water). When it is contaminated with water it makes your brakes fade very quickly.
If the problem is just a clutch cable (clio 55 plate should be cable, not hidraulic), you can adjust or replace the clutch cable quit easily.
If the problem concerns instead the clutch disk, then you will need to put a car up on a bridge, empty the oil and fluid, and remove the clutch that is attached on the engine, on the right lower side. This is usually not a job for home repair.