Question about 1990 Buick LeSabre
It was working fine and know it won't open at all. I need to know how to get the door to open from the outside and the inside again.
you may have a broken inside handle, open the door, remove screws holding door panel on,then pry door panel off, it has plastic retainers that hold panel on they pry off and pop back when installing panel, once the panel is off you will see if the rod just came off or if handle broke if its the handle replace it remove screww holding it and install new one, some are held with revits, drill revit to remove,use screws to reinstall. hope this helps.
Posted on Dec 26, 2009
is the battery flat as this will keep the dead locks on but it will feal as if its unlocking , . you can jump start the car from the starter motor by jacking it up put one lead to sub frame and hold one on starter 12v supply (the thick red one)
Posted on May 06, 2009
SOURCE: outside drivers side door will
the plastic connection on the inside of the door lever has broke off with old age ,take door panel off and have a good look then come back if you cannot sus it
Posted on Jul 27, 2011
Tips for a great answer:
Jan 27, 2016 | Cars & Trucks
Mar 25, 2014 | Dodge Stratus Cars & Trucks
Apr 03, 2013 | Cars & Trucks
Jul 08, 2012 | GMC Cars & Trucks
Mar 19, 2012 | 2009 GMC Acadia
Feb 29, 2012 | 2006 Ford Fusion
May 03, 2011 | BMW X5 Series Cars & Trucks
Jun 03, 2010 | 1997 Toyota Avalon
Jun 05, 2009 | 1998 Toyota Camry
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: