Question about 1994 Jeep Grand Cherokee

1 Answer

Im having a problem with my 94 jeep grand cherokee laredo. It has hesitation to start. It cranks, but wont start after first crank. It takes a few for the car to start. I had the fuel pump changed, and some kind of sensor. Im wondering if it might be the Powertrain Control Module that might be the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

  1. I DONT LIKE ASKING QUESTIONS ON A SOLUTION But on a Ep -Engine Performance problem some have to be ask
  2. >>Millage on Current Tune Up and Was it a Major or Minor Tune up?<<<<
  3. With Fuel Pump was the Inline fuel FILTER Replaced ?
And Now I aproach the car & you With A Hard start Complaint we must have Good Functional Engine Performance Parts with Engine, Such as
  1. Spark Plugs
  2. " " Wires-
  3. Distribitor cap & Rotor
  4. PCV
  5. Air Filter
  6. oil Change
  7. Inspection of All Vacuum Lines & Replace as Needed
  8. Ignition timeing Checked for Accuracy and deflection>> Slack in Timing CHAIN 10 Degrees is what Most Manuals say I Go at 8 Degrees Yes this Is a Necessary Evil $$ wise for Long Life and Optimum Performance
  9. Clean Fuel Injection system
The Majority of these Parts are Preventive Maintenance Parts and Pending Question #2 TOP Yes I Do Believe with this LIST You Could say G O O D B Y E to the Hard Start Problem If some parts Had Low Millage they Would not require Replacement.


Now with all These Items In Place and Up to Peak Condition there should be NO HARD START PROBLEM At all If SO The Repair should Be Very Inexpensive and A Fast Repair

I am in Great Hopes that I Have Helped you With Your Problem As this is My Goal
I thank you for the Opportunity to be Of HELP to You!! Rejakwilson

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE TO CHANGE OUT A CRANK SENSOR IN MY GRAND CHEROKEE.


Jeep Crank Sensor Replacement, P Codes P0351, P1391 ...

? 6:24
www.youtube.com/watch?v=7D0vUEDSwXo
May 12, 2013 - Uploaded by Robert DIY Replaced the crank sensor on this 2003 Jeep Grand Cherokee.... to replace my crankshaft position sensor on my 1998 grand cherokee laredo.

Jeep Crankshaft Position Sensor Replacement (CKP, CKPS ...

? 4:07
www.youtube.com/watch?v=1Ho5iAKQV00

Oct 27, 2013 - Uploaded by WeekendHandymen
hi , do you think if I replace crank sensor will solve the problem ,my jeep .... Where's the crankshaft located in 99 jeep grand Cherokee laredo .


Oct 24, 2015 | Cars & Trucks

2 Answers

My car wont start after i changed the fuel filter wat is the problem 2000 jeep grand cherokee Laredo


keyon .off 5 times then start.
or crank for 5 seconds.
this will prime it
some cars dont prime with key on trick. only cranked.

Apr 20, 2015 | 2000 Jeep Grand Cherokee Laredo

1 Answer

I cant find the obd plug in on my 94 jeep grand cherokee laredo and my jeep will turn over but is hard to start what would cause this?


It does not have an obd11 connector, it's too old. The extended crank time could be a couple of things though. I've seen problems with fuel pumps, fuel pump relays and crankshaft sensors. How many miles on it? Has the fuel pump or filter been changed before?

Apr 03, 2011 | 1994 Jeep Grand Cherokee

2 Answers

Hesitation when driving 1996 jeep grand cherokee


Try changing your spark plugs and plug wires.

May 02, 2009 | 2002 Jeep Grand Cherokee

2 Answers

1993 JEEP GRAND CHEROKEE LAREDO IM TOTALLY BAFFLED


Back up a minute...Do you have spark from the coil wire? (juice from coil) If so, change or check rotor and cap (wires do not all go bad at same time so unless they are wet, likely at least good enough to start engine)

Mar 05, 2009 | 1993 Jeep Grand Cherokee

1 Answer

It won't start when it is cold but starts fine when warm. Will start eventually if you pump the heck out of it and crank it and repeat quite a few times. I have a 91 cherokee that won't start when it's...


Try cycleing ur key a few times before actually cranking it alot of the time wen a fuel pump is about to go it wont prime cycling the key will prime it. As for the fuel gauge thats part of the fuel pump its called a sending unit and in the jeeps its all in one unit. it sounds like your fuel pump is about to go tho. i had the same problem with my 93 jeep grand cherokee laredo. i replaced the fuel pump and it runs fine now u can get it from your local autozone for about 140. hope this helps let me know

Nov 22, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...