Question about 1994 Dodge Ram 2500

1 Answer

1994 Dodge Ram 1500 5.9l Turns over wont start

Has no spark. Coil checks Fine,Cam position sensor is new along with battery. Can not find any loose conections, blown fuses or relays.

Posted by on

  • 1 more comment 
  • tsnyderjr23 Jan 14, 2009

    every thing i have read says that crank sensor has nothig to do with ignition other than engine speed. pick up coil/cam position sensor controls spark to the coil but i will check crank sensor.

  • caseybamberg Feb 11, 2009

    I have a 1994 dodge 2500 5.9L gas it turns over but wont start it gets spark when you first try to start but it stops. I put a new ECM and still have the same problem.

  • ricki21 Mar 18, 2009

    we have the same problem with our 1994 dodge 2500 van.. do you think it could be the fuel filter

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Have you checked the crankshaft sensor? thats what gives it spark to the coil then to the plugs

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

It turns but it wont start,it has gas and power


Pull off the coil ignition cable at the distributor and check for spark coming out of coil when cranking engine over. Use a heavy rag or glove to hold the wire 1/4 inch from a metal ground. Should see a strong blue spark when cranking to verify ignition is good. If no spark, check for battery voltage to coil on the coil primary. If you have current to the coil, suspect a bad coil, ignition module, crank position sensor, or cam position sensor, or pcm. The coil, ignition module, and sensors can be tested before replacing.

Jan 29, 2013 | Cars & Trucks

3 Answers

My 2005 dodge neon sxt wont start, no spark, changed cam shaft sensor, coil is good, cant find the crankshaft sensor, also wondered if it could be the timing belt, what do you think?


the crank sensor is on the back side of the engine just above the oil pan there will be two sensors there one is the crank sensor and the other is oil presser sensor. All so check the wires from the crank sensor to the cam sensor. If you think it is the timing belt pull the cover and check it. hope this helps.

May 22, 2012 | 2005 Dodge Neon SXT

1 Answer

2001 300m wont start changed fuel pump turns over but will not start any ideas


is there a spark at the leads? check leads, coil, crank or cam position sensors, e.c.m in that order. if there is a spark and the new pump's fitted correctly, check for fuel blockages along fuel line, if injectors are opening,air flow sensor.
or alternatively have a reliable technician put it on a diagnising machine. i'm sure you'll agree that it would save alot of time and effort

Jul 08, 2010 | 2001 Chrysler 300M

1 Answer

1994 dodge steath will not start no spark or gas at spark plug


bad ignition switch not giving power on start mode

May 12, 2010 | 1994 Dodge Stealth

1 Answer

2000 alero won't start. turns over and fires but wont start


make sure your cap and rotor timing is correct double check spark plug routes (mistakes happen). maybe your timing is off in general.

Jan 16, 2010 | 2000 Oldsmobile Alero

1 Answer

No spark


TRY THE THROTTLE BODY POS SEN AND THE COMP

May 25, 2009 | 1994 Dodge Ram

3 Answers

1992 dodge 318 engine turns over, but no start. No spark present. Replaced ignition coil and pickup coil, still no spark. 1992 dodge ram 150 full size truck 318 engine. starts sometimes then wont start...


if truck has a ceramic ballist resistor near and connected to coil this could be problem or the crk posistion sensor could be too, i would change ballast first if you have on your truck appx cost $10

May 09, 2009 | 1992 Dodge Ram 150 Club Cab

1 Answer

1996 1500 ram wont start


there is also a crank sensor that can keep it from sparking. are you getting voltage to the coil

Jan 03, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

585 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...