Question about 2001 Hyundai Tiburon

1 Answer

Need to get cv joint out of hyandai tiburon - 2001 Hyundai Tiburon

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

You have to apply alot of pressure to get the old cv joint out been there done that too many times.if you can find something to use as a prybar to pop it loose it woul help you alot.theres a c clip that holds it in and you have to get it past that to get it out,

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cv joint but the plastic thang that go around it


One would have to remove the half shaft to service the cv joint properly.

CV-Joints Overhaul Check the CV-boot for wear tccs7030.jpg

Removing the outer band from the CV-boot tccs7031.jpg

Removing the inner band from the CV-boot tccs7032.jpg

Removing the CV-boot from the joint housing tccs7033.jpg

Clean the CV-joint housing prior to removing boot tccs7034.jpg

Removing the CV-joint housing assembly tccs7035.jpg

Removing the CV-joint tccs7036.jpg

Inspecting the CV-joint housing tccs7037.jpg

Removing the CV-joint outer snapring tccs7038.jpg

Checking the CV-joint snapring for wear tccs7039.jpg

CV-joint snapring (typical) tccs7040.jpg

Removing the CV-joint assembly tccs7041.jpg

Removing the CV-joint inner snapring tccs7042.jpg

Installing the CV-joint assembly (typical) tccs7043.jpg

prev.gif next.gif

Oct 08, 2010 | 2004 Oldsmobile Alero

1 Answer

Need a drawing of how to install a cv boot and axle in a 01 hyundai tiburon step by step fast


does it make noise? if so, dont waste you rtime, replace the complete axle. take wheel off, take lower ball joint loose, take off big nut in middle of wheel hub, now push axle through while lifting the spindle up, notwthe axle will come out of hub, now you will need to pry the other end out to get it to come loose, there is a small clip holding it in. you should really have a person experienced do this, it should take maybe .5 -1.0 hr

Oct 17, 2009 | 2001 Hyundai Tiburon

1 Answer

Tools needed for replacing 2001 Hyundai Tiburon CV joints.


CV joints are not hard if you do some research. Get a shop manual first. You will need a good jack, two jack stands. I am not that fam. with the Hyundai, but some fwd cars have med/ large bearing retaining bolts so you will need 1/2 drive socket set up to say 33 mm. You will need a whole day or 2 to do this. set aside that much time in case of some road block. You have to pull both wheels and fender wells. On some cars you will have to pull the struts or the lower arms that hold them to the body to give room to pull out the cv assy. Do one at the time on some fwd's if you pull both the ring gears can fall out of sync and thats not good. Buy the complete cv axel rebuilt if you can. Work slow, take pictures as you go, be careful.

Jul 03, 2009 | Hyundai Motor 1998 Sonata

1 Answer

2001 Hyundai Tiburon making a type of whirring noise in front end


Wheel HUB bearing... find out which one (possibly both).

Jun 29, 2009 | 2001 Hyundai Tiburon

1 Answer

ABS light on (on dashboard)


If While Installing CV Joint you Failed to Disconnect Wheel Speed Sensor FOR ABS System, It is Possible The wire got stretched and broke off INSIDE Outer Wire Insulter. OR Just Totally UNKNOWINGLY Broke it or Disconnected it. OUTER CV Joint? Match up PERFECTLY? Sense Light came on After Repair to THAT Particular side Concentrate on INSPECTING That side, for A 2 Wire Wrapped as 1 May be a Plug Just inside the Engine Compartment, Coming FROM Wheel well with a 2nd Plug There 1st Plug Being AT The SAID Wheel Backing Plate. Upon Discovery of Problem Reset Light at A Service Center OR Just Disconnect NEGATIVE Battery Cable for 1 minute. Again no doubt that WhEEL's Part Of the ABS Circuitry was Disrupted
I'm in Great Hopes you Find this as Helpfull Information and it assists you in Correcting your Problem. Have a Great Day,
RejakWilson

Jan 15, 2009 | Hyundai Motor 2000 Tiburon

Not finding what you are looking for?
2001 Hyundai Tiburon Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...