Question about 2004 Ford F150

1 Answer

Noise and jolt

I have a 2004 Ford F-150. There is a clunk when I accereratel from a stop. Also a loud bang and the whole truck jumps when I switch from 2H to 4H. Any Idea.

Posted by on

  • Anonymous Jan 18, 2009

    Having the same problem, some people have been telling me it may be a ujoint.

  • Leritloven4x Jan 30, 2009

    My 2004 150 brakes pulsate when coming to a stop the faster I'm going the more it pulsates (a dull pulse)

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try friction stabalizer (motercraft) in your back axel. It smells real bad but easy and cheap to use about $15 for two tubes. Accses the bolt on your back axel with a 3/8 wrench (takes a little strengh) once you get it open you just squeze the stabalizer in. I have 2004 150 lairet was having a bit diffrent of a problem that was caused by gaers sticking together (which may be your problem?)last week when buying out my wifes explorer lease I was able to talk to a very experienced tran. mech. who told me to try this or spend $1500 to have my axel ripped apart and repaired, most of cost labor. This worked for me, the mech. said it would take about 150 miles to work it self through but took my truck about 80 miles good luck to you my ford truk brothers.

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Ford F-150 was running fine and last week I had to use the four wheel drive a couple of times . Science then when I take off from a stop I gent a loud Chungking noise with a jolt until I get moving...


Something has let loose in the transfer case. Probably bearings. Better get another or have that one fixed. Keep driving it and the case will blow a part. This could damage the transmission also.

Feb 28, 2015 | 2005 Ford F-150

1 Answer

My ford explorer 2004 makes a loud banging noise while turning and the 4X4 high light flashes on and off as well as ABS light stays on


One loud bang is usually a ball joint. Jack up one side of car and shake tire to see what is loose. Shake each steering component while the side is lifted. Do both sides of car.

Dec 30, 2013 | 2004 Ford Explorer

1 Answer

Clunking front hubs


usually the noise in the front end is the u-joints or cv joints out towards the tires.

May 21, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Ford F150 FX4 2004 Front Hub Noise


have your cv shat checked or changed, those clunking noise is a sign of "constant velocity"CV joint failure, sometimes the noise stops because it is caused by damaged bearings. you should have it checked or changed before it fails on you, once this happens you will not be able to move your vehicle unless towed.

Mar 20, 2009 | 2004 Ford F150

1 Answer

Banging


would also check universals

Jan 28, 2009 | 2004 Ford F150

1 Answer

Clunking and grinding noise


My 2003 F150 Supercrew would not engage in 4x4, it ended up being the shifting fork in the front end, cost me $200.

Jul 16, 2008 | 2005 Ford F-150

Not finding what you are looking for?
2004 Ford F150 Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...