Question about 2001 Jeep Cherokee

1 Answer

Rmote locking - loud beep from horn!

Can the remote key fob be programmed to cut out the horn noise every time I lock the car?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

On my 05 ram PU yes....call your local dealer for procedure if you cant find it in you owners book like i did

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn off the horn beep when using the lock button on the remote


Some not all key fobs. U push and hold lock and unlock for three seconds. At the same time. Some not all

Apr 09, 2016 | 2003 Chevrolet Chevrolet Malibu Base

1 Answer

How do I get my alarm system to chirp instead of beep when it goes off or when I lock my doors with the remote entry key fob?


Check to see if your vehicle honks when you press the "lock" button on your key fob. Press the "lock" button multiple times in a row. Many devices won't beep unless you double-tap the button after locking. If the horn doesn't honk, but the lights flash, your chirp feature is probably disabled.

Use your keyless fob and ignition key to enable the audible chirp. The process varies considerably on different makes and models. You must usually consult your owner's manual, a dealership or the alarm manufacturer for the correct process.

Jan 29, 2015 | 2006 Hyundai Tiburon

1 Answer

Reset key fob


Unlock all doors, foot on brake, all doors closed. Cycle key quickly but carefully on-off appr 10 times until the car honks one time.

Do not turn the key far enough to start the car, just to the 'on' position so the dashboard lights up.

When the horn honks, open and close the driver's door, press any remote button and that's it.

Program another remote? Quickly open and close the driver's door again and push a button on the 2nd remote. That's it.

When you're done, remove the key and the horn should honk 3 times. You're all set.
Sometime it takes more than 10 on-offs to set program mode. Open/close the door, lock/unlock etc, wait 10 minutes, then try again

Jul 22, 2014 | Subaru Outback Cars & Trucks

2 Answers

2003 Montero Sport Remote (FOB)


HI Kemp you might have too reprogram your key fob
check your owner Manuel for how to program key

Sep 09, 2012 | 2003 Mitsubishi Montero Sport

1 Answer

Reset tire monitor on 2009 escalade


Hopefully you still have you manual. I will tell you how to reset the HHR, I found it in my manual. Turn the key to on, press lock and unlock at the same time on your key fob. The horn will beep twice telling you that you are in program mode. The left front turn signal light will come on, press the valve core letting air out of the left front tire. The horn will beep when left front is programmed. Then the right front turn signal will come on, let air out till horn beeps. Then right rear, same procedure then left rear same procedure. When that is done horn will beep twice again saying tire program is complete. Turn key off, make sure you air all tires back up.

Jan 03, 2012 | Cars & Trucks

1 Answer

Crimestopper SP501 car alarm/remote starter will not respond. The 2 way one doesn't work, the sidekick does.


You need to program your crimestopper sp-501 key fobs, you need to program both the 2-way and the 1-way key fobs, during the same key fob program session. First find your valet button/switch, when you have found it, turn your ignition on and press the valet button four times, if you have a toggle type switch for a valet switch, toggle it up and down four times, when its in remote key fob program mode, it will honk your horn 4-times followed by 4-parking light flashes. Once your have done this press the lock button on the 2-way key fob, horn will honk and the 2-way will sing a little song to confirm programed, then press the lock button on the 1-way key fob the horn honk will be your confirm programed. turn ignition off this will exit you from program mode. then shut all doors and test key fobs for operation functions....hope this helps you out

Dec 03, 2011 | 2006 Hyundai Sonata

4 Answers

How do I disable the alarm system for my 2006 Chevrolet Cobalt? Every time I unlock the doors and open them, a short honk beeps in 1 second intervals, and then after ten seconds proceeds to the full...


If you lock your doors with the remote, you have to use the remote to unlock them or it set off the alarm. I don't know why the manufacturers designed it that way(kind of stupid)but it's programmed into the on board computer. You can't disable the alarm without creating a worse problem somewhere else.

Jan 02, 2011 | 2006 Chevrolet Cobalt

1 Answer

I just purchased a used 2004 trailblazer and i was just given a copy of a key with no alarm remote, but i purchased one at a flea market and i need to now how to program it.


with doors closed. hold down unlock button on drivers door cut key on and off two times you should hear locks cycle and horn chirp. release unlock now program fob by holding both lock and unlock. you will have to program all fobs. cut key on to exit programming mode

Feb 17, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Key fob interference problem 2003 altima


Hello and thank you for using FixYa!

Most likely the remote has failed. If you have another remote for the car, try it. All features should work on the spare remote. You will need to get another remote and program it to correct this. Here is a link on how to program it.

http://www.ehow.com/how_4669678_program-nissan-remote.html

Thanks Jay!

Jul 12, 2009 | 2003 Nissan Altima

1 Answer

How do i enable factory alarm system without keychain remote?


The Simple Act of Locking the Driver side Door WITH KEY Arm the Factory Alarm. And UNLOCKING Same Door with KEY Disarms it The FOB < Rmote for Alarm Just Honks Horn and Flashes Lights, But it Does the SAME ARMIND & DISARMING. I Hope this Helps You out !!

Jun 15, 2009 | 2000 Pontiac Bonneville

Not finding what you are looking for?
2001 Jeep Cherokee Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...