Question about 2000 Chevrolet Silverado

1 Answer

Wipers theres only full speed

Posted by on

  • minniepausal Apr 19, 2009

    Wipers have high speed only.Turned truck off while intermitton wipers still on. Turned truck on with ice on window. I understand what was wrong wiht this but want to know what part to replace...high speed still works but low and intermitten does not...are these seperated in some way...perhaps two seperate motors

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Resistor gone for blower. Not sure where yours would be, can't seem to find info I need. Common locations, in under dash on passenger side near blower motor, under hood on firewall , passenger side under cowl. Behind glove box.

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 bmw 325i, the wipers same times just dont work, by turn off and turn on the engine same times they work again, were or what I need to check or replace to fix this? thank you


check the wiper delay setting on the wiper control arm. There will be several settings as to when they wipe . From a wipe every second to wipe every 20secs. depending on the amount of rain falling. Then you go to 1/2 speed and full speed by pulling the lever further down

Nov 30, 2013 | Cars & Trucks

1 Answer

Hi - I have 1 2008 Acura MDX and suddenly the wipers came on and won't shut off. (Stuck in intermitten mode.) Also the HIGH speed option for the wipers also isn't working - it just stays on standard speed....


Front wipers.
they all guess, do you want me to guess, too? surely not.
or test?. we can use a voltmeter to find this.
what we do is look at the schematics at alldata.com
and its all clear. a simple road map;

Sticking on possibles.
the fuses are underhood. fuse 11 and 31
bad motor , internal keep alive cam switch stuck on,
will cause continuous wiper.s

so will motor colored wires green or blue hot full time
will keep motor going full time (any voltmeter, easy check)
12vdc is bad, 0v good (wipers off)
next and last is that wiper relay in hood fuse box, shorted. (pull it out see if they shut off?)
if the relay is good then its input is wrong. the control block.

the combo switch wipers on , sends a CAN buss digital commands to the MICU control block, this i turn powers up the wiper relay.
the MICU has a diagnostic port,and can be tested at the dealer
or errors.

if the relay coil pins are hot all the time, then the MICU /combo side is failing, if not, the problem is the relay ,if its output is hot all the time.
how is that?

Oct 22, 2013 | Acura MDX Cars & Trucks

1 Answer

2009 Ford Mustang GT/CS; Wiper's inop. Motor and switch are brand new. Circuit 2026 (constant 12v+) is good, circuit 2025 (ign 12v+) has no power. Fuses for both circuits are good, and I have 12v+ positive...


Could it go through a body control module some where? In most cases Key,to switch,then to motor. All the speed and park should be built in the motor/gear box.

Oct 17, 2013 | Ford Mustang Cars & Trucks

1 Answer

In delay cycle wiper hesitates


Hi,
The hesitation of the wipers in delay cycle is normal. You can twist the nob on the end of the arm to speed up or slow down the hesitation.
If you are driving in a light mist and the wipers ran at normal speed most of the time the would be wiping a dry windshield. Chattering and bouncing. With the delay set at the right speed the wipers only go on every so often, No dry chattering. In a full rain just twist the knob past the delay cycle to get low or high speed from the wipers.
Hope this helped you.
Wayne

Feb 21, 2011 | 2001 Buick LeSabre

1 Answer

Is there a procedure to check the wiper motor on 1991 S10 pickup (only 42000 miles), to be sure it is defective and not a wiring problem?


ONLY PROCEDURE FOR WIPER MOTOR IS YOU HAVE 2 SPEEDS THAT WORK SLOW AND FAST SPEED.WIPERS WILL RETRACT TO THE BOTTOM OF HOOD LINE WHEN YOU TURN OFF. WIPERS SHOULD TURN OFF. CHECK WIPER RESERVOIR MAKE SURE ITS FULL AND WIPER WASHER SPRAY FLUID CLEAN WINDSHIELD. IF WIPER MOTOR DO ALL THE ABOVE THEN ITS OKAY.IF WIPER MOTOR WORKS SLOW LOOK FOR BINDING AT WIPER ARM LINKAGE AND PIVOT LUBRICATE LINKAGE AND PIVOT COULD HELP.IF WIPER MOTOR DONT WORK CHECK FOR POOR GROUND OR BLOWED FUSE.WIPER WORK AT ONE SPEED CONTROL SWITCH IS BAD.IF WIPER BLADES STOP WHERE EVER THEY ARE OR FAIL TO TURN OFF UNLESS YOU TURN OFF IGNITION SWITCH WIPER MOTOR LIMIT SWITCH BROKEN.IF WIPERS DONT RETRACT BELOW BOTTOM HOOD LINE LOOK FOR MECHANICAL OBSTRUCTION OR WIPER MOTOR FAULTY.

Nov 14, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

Wipers will not shut off and return to correct position


switch is bad there are resistors that control what speed the wipers go. if you go to high there is no resistors for that it is full power. so that control arm will need to be replaced.

Sep 02, 2009 | 2006 Honda Civic Hybrid

1 Answer

Windshield wiper failure


It sounds like the park switch in the top end of the wiper motor is stuck closed.

Charlie

Aug 14, 2009 | 2005 Volvo S40

1 Answer

Windshield wipers go full speed on intermittent setting


Sounds to me like the person you talked to was probably just a service writer who has no clue. That would either be a body control module malfunction, or a bad wiper switch. The wiper switch would be a more likely cause.

Apr 25, 2009 | 2005 Jeep Liberty

2 Answers

Intermittent wiper malfunction, 2004 Sable


replace the wiper relay.

http://cgi.ebay.com/ebaymotors/2004-04-Mercury-Sable-Service-Repair-Manual-Factory-OEM_W0QQitemZ370138266168QQcmdZViewItemQQimsxZ20090101?IMSfp=TL090101114011r5345

Dec 26, 2008 | 2001 Mercury Sable

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...