Question about 2002 Dodge Durango

1 Answer

Where is the reset button located

My battery was bad, and it took me 4 days to replace it. Now my truck won't shift out of park. I never had a problem before my battery went bad.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My EX wife had a similar incident. when i arrived it was that her wheels were turned all the way to one side. once i put in the key and turned steering wheel the same direction as the wheels are facing, the car started and the shifter let loose.

Posted on Jan 05, 2013

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 141 Answers

SOURCE: Dodge Ram Truck wont shift into park or reverse

The parking pin inside the transmission has sheared and is interfering with reverse as well. I would locate a reputable transmission shop.

Posted on Jan 09, 2009

  • 45 Answers

SOURCE: car won't go into park

Sounds like the shifter cable. I had a Plymoth Voyager that did this.

Posted on May 01, 2010

  • 14036 Answers

SOURCE: Truck is shifting into 4 wheel drive when it is

PROBLEM COULD BE IN THE 4WD SWITCH IS FAULTY OR THE SWITCH WIRING SHORTING TO GROUND

Posted on Aug 13, 2011

  • 11800 Answers

SOURCE: Truck is shifting into 4

You have a bad contact in the wiring to the switch - the 2 wires are shorting. You will have to dismantle the center console and inspect the switch - replace it if you have any doubt..

Posted on Aug 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Key won't turn, won't shift from Park


My 2003 Saturn l200 2.2 ecotec did this when the battery was dead. Put some juice on the battery, then the car came out of park, and I was able to remove the key. To the car, there's a vast difference between a sluggish battery and a dead battery. It may have enough amps to crank it, but it wont start w/out full output from the battery.

Apr 12, 2013 | 2004 Chevrolet Cavalier

1 Answer

2000 Cirrus automatic transmission. won't shift easily or not att all


go to the given link get the manual with diagram and solve the problem your self http://toolsnyou.com/

Dec 21, 2017 | 2000 Chrysler Cirrus

1 Answer

2000 Mazda MPV Starts & runs won't go out of Park Shifter handle moves won't change gears??


I had this issue in the past. All I did was to replace the brake switch. This part is located behind the brake pedal. Btw, if you this run into this issue again in the future, you can always push this switch with your finger and it's located on top of your steering wheel enclosure, this will disengage the shifter.there is a small rectangle shape cover that you need to remove first.

Aug 08, 2017 | 2000 Mazda MPV

1 Answer

Why my 2007 police crown Vic won't shift out of


All 2000 and up vehicles utilize a Solenoid which is powered by depressing the Brake Pedal to allow the Shift Lever to be move from Park to any other position. Is the Shift Lever located on the Steering Column or the Floor? In either case typically the Solenoids used by Ford do occasionally go bad. I highly recommend having a certified technician replace the solenoid.

Nov 18, 2011 | 2007 Ford Crown Victoria LX Sedan

1 Answer

I have a 1994 Ford Thunderbird LX V8. A few months ago when I put the car in park, the air conditioner and the battery amp guage quit working. I found a fuse that was bad and I replaced it and then the...


I'm betting it has something to do with the shift lock actuator or the harness to the actuator. I'm pretty sure it is located on the top of the steering column on your vehicle. The lower part of the dash will need to be removed and then the steering column lowered in order to gain access to it.

This vehicle does have an airbag and unless you experience with airbag systems I would not recommend tackling this yourself.

unplug the interlock. Replace the fuse. Start the vehicle. with your foot on the brake manually release the interlock with you hand and shift through the gears. If the fuse does not blow your on the right track. If the fuse does blow let me know and I'll get you some more info.

Let me know if you have any questions and thank you for using Fixya.com

Oct 25, 2011 | 1994 Ford Thunderbird

1 Answer

My key wont turn to off in order to remove my key from ignition while in parking


Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Aug 05, 2011 | 2005 Chevrolet Monte Carlo

1 Answer

Hello. My 1997 Chevy Tahoe refuses to start. The problems began with a bad fuel pump. I changed. It worked. The fuel pump died again. I changed it again and it has been working. I parked it for two weeks....


Now you have a good battery & a starter that turns over the motor

Have you cycled the key on & off with a fuel pressure gauge on the
fuel rail?

Do you have a fuel filter that isn't over 3 or 4 years old?

Have you checked for spark while cranking ? Use an old plug on the wires,
if you have ignition wires,don't ground the wire without resistance

If you removed the ducting & MAF Sensor it won't start

Tell us what you checked & exactly how that was done.

Jun 09, 2011 | 1997 Chevrolet Tahoe

1 Answer

Gear shifter is broken


When you say it is broken do you mean it won't move into certain gears?

In past couple days our '04 Echo shifting lever won't go into Park or 2 or Lo gear. And we couldn't take the key out of the ignition. My husband took to center console cover off and when he loosened the bolt under the lever we were able to get it into park and get the key out. But still cannot get into the lower gears. Will probably be taking it to a transmission shop before making major decision.

If your's is an automatic trans, and it is locked in park, there is a small opening on the right/front side of the shifter, pop the top and press the white button, it releases the lever.

Good Luck!

Jun 05, 2011 | 2004 Toyota ECHO

Not finding what you are looking for?
2002 Dodge Durango Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...