SOURCE: Disk Brakes Adjustment/Nissan Sentra 2001
you cant the only thing u can do is bleed them they are self adjusting
SOURCE: Nissan Sentra 2001 2.0/SE Disk Brakes
you cant they are self adjusting the only thing you can do is bleed them and see if that helps
SOURCE: Where is the blower resistor on a 2001 Nissan Sentra?
Its actually not that bad to change. If you open the glove box and remove the screws then the screws along the bottom of the glove box at the bottom of the dash the box will slide out. Remember to disconnect the light if it has one. Now you will be able to see the underside of the dash. You can see a large black box that has wires and vacuum lines all over. You need to locate a small flat plate with two screws and a plug in the middle. Disconnect the plug and remove the screws. The resistor will come straight out. The back side will look like small coiled up springs of different sizes. Install in reverse.Hope this helps. Good luck. Please re-post with updates. Thanks cj2176.
SOURCE: 2001 sentra no communication with scan tool
2001 nissan sentra gxe ecu not communicating, tried the fuse, fuse keeps blowing.
53 views
Usually answered in minutes!
×