Question about 2002 Chevrolet S-10

Open Question

2002 chevy s10 egr valve - 2002 Chevrolet S-10

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

im4um2
  • 77 Answers

SOURCE: egr valve

Here is a picture of the egr valve for your blazer. http://www2.partstrain.com/store/?Ntt=EGR%20Valve&N=9968%201588%204294967265
Quite pricey. As for changing it out I would head to your local library and seek out their online car repair sources. Be sure to take a jump drive or a floppy disk to take the documents back home with you. From your home print out the proper techniques as well as torque specs for the removal and replacement of the egr valve. Good luck.

Posted on Jun 27, 2008

countrysi248
  • 443 Answers

SOURCE: EGR valve on my 1995 Chevy s10

up on manifold but most are vacuum operated check again to make sure a solonoid operates this device .. usually when the egr valve goes bad the vehicle dies at intersections or stopping

Posted on Jan 26, 2009

  • 333 Answers

SOURCE: WHERE DO I LOCATE THE EGR VALVE ON MY 2001 CHEVY IMPALA 3.8 V6

The egr valve is located at the end of a hose that plugs into youe valve cover. It is pushed right into a rubber grommet that is located in one of the valve covers. I hope this helps. don.t forget to rate my nswer, thanks

Posted on Feb 27, 2009

  • 400 Answers

SOURCE: 2006 chevy malibu.... where is the egr valve

If it's a US car then there is not an egr on the 2.2L engine. I think some of the mexican and oversea's engines had them, but not here in the US.

Posted on Oct 21, 2009

  • 1 Answer

SOURCE: My 1999 chevy s10 runs rough at idle

By a ford

Posted on Mar 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the egr on a trail blazer 2002 4.2 l


I can't find any listing showing that this 4.2 6 cylinder engine uses an EGR valve, and I have read chevy owners saying the same thing about this engine. It does have a block off plate, but no valve mounted. If had one it would be bolted to the top passenger side of the engine

Jul 19, 2016 | 2002 Chevrolet TrailBlazer

1 Answer

2002 chevy 5.3, silverado egr valve. WHERE IS IT


It is on passanger side of engine, in front of the oil filler tube. Round looking thing, five wire connector plugged in !

Dec 15, 2014 | 2002 Chevrolet Silverado

1 Answer

Where is the egr valve located in my 2002 chevy impala 3.4


the EGR valve is located at the rear of the upper intake manifold, on the driver's side. It is electrically controlled and has a black plastic looking cylindrical cap with a wire connector at the top.

Feb 11, 2011 | 2002 Chevrolet Impala

2 Answers

Chevy pickup 350 vortex code p-1406 comes up can't find what code means in my book. i know it has something to do with manufacturer control auxiliary emissions controls. i don't know where to look for the...


DTC P1406 IS EGR VALVE PINTLE POSITION CIRCUIT MALFUNCTION CONDITIONS.POSSIBLE CAUSE EGR SOLENOID CONTROL CIRCUIT IS OPEN SHORTED TO GROUND OR TO B+ -CHECK EGR VALVE FUSE - OR THE EGR VALVE AND PCM HAS FAILED.

Jul 09, 2010 | 2002 Chevrolet Silverado 1500

2 Answers

Chevy 2002 Malibu ERG valve


Symptoms of a bad EGR valve are usually stumbling idle or the engine stalling when the car is warm (normal operating temperature). Find the EGR valve and locate the vacuum line attached to it. Start the engine cold and wait for it to warm up. When the engine starts to stumble, pull off the vacuum line. If the EGR is bad, the engine idle will stabilize and no longer stumble.

May 25, 2010 | 2002 Chevrolet Malibu

1 Answer

Check engine light is on. I was told it is the EGR. How do I locate the EGR on this vehicle? The code is P004. 2002 Chevy Express with 5.7 ltr. engine.


http://www.autoguide.net/apf/chevy-engine_parts/express_2500-2002-air_intake-b7010_148259del.html well it should be near the front of the intake manifold, you will see the EGR valve ( which looks like the thing on the web site link). Disconnect the electrical connector, remove the two 10 mm head bolts, remove the lead coated gasket from the intake. Be sure to clean the surface of all evidence of the gasket, using care to not get any into the intake. Place the new gasket on the EGR valve, using the bolts to keep it in place, put the new EGR on the intake. Tighten the bolts up evenly, plug the connector back in, hope this helps

Feb 09, 2010 | 2002 Chevrolet Express

1 Answer

Pcv location on 2002 s10


it is a tube connected to the valve cover. So there really isn't a valve.

May 15, 2009 | 2002 Chevrolet S-10

3 Answers

I have a chevy blazer 94 S10 still quit on the road.


How is it running before it quits onyou. This could be the culprit of an egr valve. How many miles on thevehicle. The egr seems to die on a certain mileage pattern. Also youcould start by cleaning the egr valve before replacing it. This couldvery well help the situation, but this is just a guess. Hope thishelps!!

Apr 30, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

EGR valve on my 1995 Chevy s10


up on manifold but most are vacuum operated check again to make sure a solonoid operates this device .. usually when the egr valve goes bad the vehicle dies at intersections or stopping

Jan 26, 2009 | 1995 Chevrolet S-10 CA Edition

1 Answer

Egr valve


Here is a picture of the egr valve for your blazer. http://www2.partstrain.com/store/?Ntt=EGR%20Valve&N=9968%201588%204294967265
Quite pricey. As for changing it out I would head to your local library and seek out their online car repair sources. Be sure to take a jump drive or a floppy disk to take the documents back home with you. From your home print out the proper techniques as well as torque specs for the removal and replacement of the egr valve. Good luck.

Jun 27, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet S-10 Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...