Question about Cars & Trucks

1 Answer

I have a 1999 dodge sport 1500 4x4 and it makes a clunking sound like it is skipping gears when I engage it in four wheel drive at times. I checked all fluids and changed them and checked u-joints and all is good there. Would the actuater cause this issue?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,370 Answers

4X4

On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Posted on Dec 12, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Smlslikdsl
  • 12 Answers

SOURCE: Dodge 4x4 Doesn't Engage

It's probably the actuator located on the front axle on the passenger side. Also, check all your vacuum lines to make sure there's no broken or leaking lines.

Posted on Feb 01, 2009

  • 1 Answer

SOURCE: 4x4 wont engage

There is a switch that has twwo wires going to it, it's located just above the motor on your transfer case,on the drivers side, one plug goes to the motor and the other goes to this switch, it's the motor that shifts it into low and high range, I'm not sure what the switch is called but it tells the front end when to lock and unlock.
Hope it helps

Posted on Mar 05, 2009

  • 22 Answers

SOURCE: when turning steering wheel - either way, clunking sound.

Sounds like you have a bad CV joint, this will make a clunking or clicking noise like you described only when turning, and varies with vehicle speed.

Have it repaired before it breaks and leaves you stranded, or damages anything else.

Posted on Apr 02, 2009

  • 5 Answers

SOURCE: 1999 jeep grand cherokee all time four wheel drive will not engage

Sounds like the splines on your transfer case gear are ground down

Posted on Apr 23, 2009

  • 1608 Answers

SOURCE: My 1999 chevy silverado 1500 four wheel drive

You probably have a bad encoder motor.It is located on the side of the transfer case on the drivers side.It is black.The other problem they had with these was the switch but you have already replaced this so your next thing is the encoder motor.Hope this helps.Good luck.

Posted on Dec 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not go in to four wheel drive


Dodge Ram 1500 Questions - 4WD not engaging all the ...

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusOct 18, 2013 - to get it into 4LOW is to 1st get it into HI and then stop and shift it intoLOW. ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to ... what web site can i go to so i can see how the inside looks on timing gears.

Diagnosing 4WD Engagement Problems on Dodge Ram ...

dodgeram.org > Main > Tech > Maintenance
Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having

2008 Dodge Ram 1500 Won't Engage 4 Wheel Drive: 20 ...

www.carcomplaints.com/Dodge/Ram_1500/.../drivetrain/wont_engage_4...
Ram 1500 Won't Shift Out Of 4 Wheel Low - Ram got locked into 4 wheel low. Found this ..... It would not go into full time 4 wheel drive or go into 2 wheel drive.

Software Update and Axle Disconnect Actuator ... - RepairPal

repairpal.com > Problems > Dodge > Ram 1500

Feb 08, 2016 | 2004 Dodge Ram 1500

1 Answer

I have a 99 jimmy. and when I put in four wheel drive I hear a noise kind of like skipping teeth passenger side front axle until four wheel drive locks in. and a loud clunk when coming out of four wheel...


the actuator for the hub locking is faulty and not engaging the hub correctly. There may be badly worn teeth to engage or broken parts in the hub.
Have an accredited drive line shop check it out.

Feb 10, 2015 | 1999 GMC Jimmy

1 Answer

My 1989 jeep cherokee will only drive in 4x


Check the soildnoid that engages 4x4 by switching it from 2 to 4 wheel drive and listen to it 27 dollar part if needed to be replaced

Feb 25, 2014 | 1999 Jeep Grand Cherokee

1 Answer

I have a 1999 GMC Suburban. I have automatic four wheel drive but when I shift into four wheel high it makes clunking sound. I have not tried four wheel low. I wondered why I can still use auto four wheel...


the auto 4 wheel does the same as part time in jeeps, it engages only when the vehicle loses traction. when auto 4 wheel is on the truck isn't fully in 4 wheel drive. my 02 sierra makes the clunk noise too but it does engage. try checking your fluids, i know its way pass the time for me to change mine out.

Feb 09, 2010 | GMC Suburban Cars & Trucks

1 Answer

I just purchased a 1994 ford ranger with 125,000 miles and runs great until last night when i had to engage the four wheel drive.It made a bad clunk and whining noise for some time and now i can hit the...


It sounds like the electric motor for the 4 wheel drive may not be engaging. It could also be the magnetic clutch for the 4 wheel drive may not be working. This sounds like an electrical problem.

Apr 27, 2009 | 1994 Ford Ranger Supercab

2 Answers

1999 jeep grand cherokee all time four wheel drive will not engage


Sounds like the splines on your transfer case gear are ground down

Apr 22, 2009 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Noise when engaging 4wd


I have had this problem and it could be one of three things, first the truck has automatic locking hubs, lack of lubrication to these hubs could cause them to make exessive noise while engaging. also you could need to lubricate your universal joins on your forward drive shaft. lastly my problem was abs wheel sensor actuator in drivers front hub had (internal part of hub looks like a large gear with teeth) had broken a gear off causing the hub to get wear in it making it clunk while engaging the four wheel drive.

Dec 20, 2008 | 2000 GMC Yukon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

711 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...