Question about Acura Cars & Trucks

1 Answer

The a/c in my acura legend 1995 stopped working while it was running. The button still works because when I turn on the a/c button, I hear a click right under the blower fan but the blower will not c

The blower stopped working while I was driving on the highway during the summer time. The a/c itself still works because I can hear the pump come on. At one time, I had to open my sunroof, set the button to outside air, turn the a/c on and I then could feel the cool air as the outside air was blowing through the cooling coils/piping. I need to get it fixed very soon. Anny suggestions??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 82 Answers

Check the power going to the motor to see if it's good. If it's ok, you can try tapping on the motor with handle of a screw driver or something similar, it might kick on. If there is no power, check the fuse. Otherwise there might be a switch or module problem.

Posted on Dec 12, 2012

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tripletauto
  • 1450 Answers

SOURCE: Blower not blowing

can you hear the fan working on all speeds?

Posted on Sep 22, 2008

  • 973 Answers

SOURCE: 2006 Acura MDX - A/C runs but not cold

It sounds like you are low on R134 freon, you might have a leak or maybe it just needs a recharge.

Posted on May 25, 2010

  • 1 Answer

SOURCE: I have a 1995 Acura Legend, air conditioner blower stopped workin

where is the blower fan located

Posted on Sep 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ignition key acura legend


My 1995 Acura Legend L it will start but when it starts it will not stay running

Oct 10, 2014 | 1993 Acura Legend

1 Answer

1995 acura legend radiator fan doesn't work


possibly a faulty fan motor or a fan relay be sure to check your fuses

Jan 14, 2010 | 1995 Acura Legend

1 Answer

Acura legend wont start


Run hot wire from battery to coil to see lf that is your problem.

Jan 11, 2010 | 1993 Acura Legend

2 Answers

I have a 1995 Acura Legend, air conditioner blower stopped workin


It means the blower fan is not running, look for wires that got knocked off, usually at the motor....

Good news is the AC sounds like it is working correctly, so this repair cost should be smaller. Apply external power to the fan terminal to see if it goes, if it does, problem is upstream, switch, resistors, etc.

But sounds like a fan. Test it. independently from the rest of the car

Sep 15, 2009 | 1995 Acura Legend

1 Answer

The trunk release dosen't work on my 95" acura legend, how do i get my trunk open?


With your key. Also there is a valet switch in your glove box. try turning that on and then using your release button.

Jul 11, 2009 | 1995 Acura Legend

1 Answer

Car alarm won't go off in my 1995 acura legend


you will need to hook the battery back up, and insert the key on the drivers side door and turn it both way. that should work

Jun 13, 2009 | 1995 Acura Legend

2 Answers

Main relay location


The main relay is located behind left side of the dash and above and behind the fusebox and above the hood release.

rate this solution fixya.

Diagram below:-

Acura Main Relay location and removal procedures.
mainrelaylocationacura.gifrz-0063.jpgIntegra EFI Main Relay for:
  • Honda Civic/CRX/del Sol 1984-1995
  • 1986-89 INTEGRA
  • 1990-93 INTEGRA #39400-SH3-003 RELAY (RZ-0063)
  • 1986-90 LEGEND #39400-SH3-003 RELAY (RZ-0063) (RZ-0046)
  • 1991-93 LEGEND (rz-0105)
  • VIGOR (behind the left front kick panel)
The main relay is located behind left side of the dash and above and behind the fusebox and above the hood release. The First generation Legend main relay location is between the steering column and the fuse box. It's deep in there. There was a little difficulty drawing the relay so it's actually very deep in there. There is a device (a relay) blocking the main relay. You will need to remove it to get a view of the main relay. The removal procedure is the about the same as the Accord's procedure.

mitsubalegend.jpg
Legend, 96-98 Acura TL main relay
Acura Integra 98-01 main relay location:
integra98-01mainrelay.gif
Locating the main relay using your ears and fingers:
Steps:

1. Turn the ignition to ON. You should hear two clicks (a thousand of a second apart) under the left or right side of the dash board. One click is for the ECU/Injectors the other is for the fuel pump. At this moment the check engine light should come on.
2. Listen carefully at the moment the clicks engage (usually somewhere underneath the dashboard.) Reach in and touch the main relay.
3. 2 seconds later you should feel a click if the main relay is at least working or wait until it works. At this moment the check engine light should go out.
4. Turn the ignition to start and you should feel a click, turn engine off you should feel another click.
5. Most main relays should have seven terminals. Please check if the location is already listed below.

How do I get the main relay out?
Steps: See four ways below so you can get it out. First you have to reach high up in there and do all this with one hand and a flashlight.
efiremoveinstall.gif A. Unbolt the bolt using a 10mm socket (picture A) or
Ab. Unclip the clip from the steel tab and slide it apart (picture A) or
B. Separate the steel tab from the plastic case (picture B) with a large flat screw driver jam and twist between the plastic case and the tab or
C. Disconnect the negative battery terminal. Unclip two clips I pointed with two arrows (picture C, or below) with a small flat head screw driver or with a strong thumb and then yank it out (D.) This is the preferred choice by many. Mechanics prefer choice A and maybe B. See detailed relay circuit photo.
clip.gif

mainrelaydiagram.th.gif

May 24, 2009 | 1995 Acura Integra Coupe

1 Answer

1990 acura legend body kit


a 91-95 bodykit will not work unfortunatey.but you can purchase one for older legends. Try Hondatuner magazines website

Apr 14, 2009 | 1990 Acura Legend

1 Answer

Only the high-beam lights come on and i have no taillights.fuses are good on 1989 acura legend


 john.  hi   I have a acura legend 89 . the problem is that when i turn the lights on the back lights wont turn on but  if i turn the switch back one turn they turn on ,   i did check the fuses and they are ok can any one help me???

Aug 19, 2008 | 1995 Acura Legend

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...