Question about 1996 Toyota Camry
The cool/hot engine gage shows the neede as normal (close to the midde) but when the button is switched to heat, it stil comes out cold and it doesn't warm up enough.
I would say it is the the thermostat. it makes the engine heat up to i am pretty sure 195 degrees at a fairly quick rate then opens to cool the engine once to running temperature and opens and closes as needed to keep temperature at the manufactures setting. some get stuck open so they never truly heat up.
Posted on Dec 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi you will find that the cold start injector is not working it is found near the throttle bodyand injects fuel to start when cold like aq choke on older cars . it may need replacing i suspect that it is either blocked or just worn out they are not expensive
Posted on Mar 15, 2009
Possible that heatcore is going or hose from heater is leaking or falling off.
You can go to www.autozone.com and see a full free online repair manual for your van
Posted on Apr 07, 2009
put a jumper wire between the bottom two pins in the plug for the throttle position sensor, if it idles down you need to replace the idle throttle position sensor
Posted on Apr 09, 2009
Get a T belt from toyota. It has 3 white lines on
it and and arrow mark. 2 lines are solid and one is broken. Put the
arrow facing away from the engine. The cam gears have a dot punched
into them near a certain tooth. This is where the solid white lines
will line up with. The crank gear will have a dot also. It will line up
at 90 degrees from the top, towards the front of the car. This is where
the broken line will match up with. With the belt installed with all
lines on their proper dots and arrow away from the engine, you valve
timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.
Posted on Apr 16, 2009
THIS AGE OF CAR ,PROBABLY NEEDS A RE CHARGE .OPEN HOOD LOOK @ THE LABELS.IF IT IS 134A YOU CAN RECHARGE IT YOURSELF PRETTY EASY.IF IT'S R12 YOU MAY NEED TO TAKE IT TO GET RETRO FITTED,
Posted on Jun 01, 2009
Tips for a great answer:
Feb 22, 2015 | 2006 Toyota Camry
Aug 06, 2017 | 2003 Toyota Corolla
Feb 05, 2012 | 1993 Toyota Camry V6
Jan 16, 2011 | 1991 Toyota Camry
Jun 09, 2010 | 2002 Toyota Camry
Feb 21, 2010 | 1991 Toyota Camry
Feb 02, 2010 | Dodge Sprinter
May 15, 2009 | 1992 Toyota Camry V6
Jan 20, 2009 | 1992 Toyota Camry V6
161 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: