Question about Nissan Navara
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check your ABS sensors.... sometimes they can get dirty and not read the wheel right.... that might fix you ABS solution.... and possibly your 4x4 it doesnt want to engage in 4 wheel cause of the abs
Posted on May 06, 2009
do you have a hole in the piston or gasket? If in the piston it is most likely from coolant or water. If water, could be a cracked head, or being sucked in through the intake and building up in the 6th cyl. I have a lexus that had a hole in the side of the motor and noon could figure out why. I pulled the head and found water... Put new block in and egr codes came up. Pulled EGR and found it was sucking in water, due to an exhaust leak that was allowing condensation to build and would not blow out once in the egr tube. If you face the same problem (hole in block) I am going to say too much compression. Could be from head gasket not being torqued properly and leaking cooland, cracked head, or wrong spark plugs-and worst case scenario which I have yet to witness, bad spark plug gap. Not likely on your car, i would think.
Posted on Mar 29, 2010
Tips for a great answer:
Mar 30, 2016 | 2007 Nissan Navara 2.5
Mar 29, 2016 | 2005 Nissan Pickup Navara
Mar 17, 2016 | Nissan Cars & Trucks
Jan 13, 2016 | Nissan Cars & Trucks
Dec 19, 2013 | Cars & Trucks
Oct 29, 2013 | Nissan Navara Cars & Trucks
Mar 20, 2009 | 1995 Nissan Maxima
Sep 24, 2017 | Nissan Cars & Trucks
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: