Question about 1991 Chevrolet Lumina Apv

Open Question

How do you remove the starter from a 1991 chevy limina apv minivan?

My friend wants to replaced the starter on my minivan but can't fgure out how to unmount it. He said he is having trouble locating the bolts to remove it. Do you have a diagram?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Chevy S10 Pickup Starter. Removed the two bolts

Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Posted on Jun 25, 2009

dmsr63
  • 2050 Answers

SOURCE: Wiring Diagram 1998 Chevy S-10 starter replacement

The starter has one large cable from the battery positive, and a wire that goes to the solenoid (Part of the starter) that becomes hot when the key ignition is turned to start. This also passes through the neutral safety switch. (So it wont start in gear) Not sure if this is what you need, a little vague.

Posted on Jul 06, 2009

ZJLimited
  • 17970 Answers

SOURCE: location of the thermostat in a 1997 chevy luminia 3.1 liter?

Click for zoom...

7378064.jpg

Fig. 1: The thermostat is located in the lower radiator hose on the 2.2L engine

93632e5.jpg

Fig.: Separate the housing halves to access the thermostat

Hope helps (remember rated this).

Posted on Jun 01, 2010

jturcotte
  • 8195 Answers

SOURCE: where is the starter located in the 1991 Chevy

97de1d4.gif


REMOVAL AND INSTALLATION
3.1L Engine
Besides regular hand tools, a special oil pressure sensor socket will be necessary to complete this operation.

  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Remove the A/C compressor brace (if equipped).
  4. Extract the wiring harness from the retainer and position it out of the way.
  5. Remove the cover from the starter wiring.
  6. Remove the outer nut and disengage the wiring from the starter solenoid.
  7. Disconnect the electrical connector from the oil pressure gauge sensor.
  8. Using the special socket, remove the oil pressure gauge sensor.
  9. Unbolt the starter from the engine. Retain any shims.

To install:
  1. Install the starter to the engine, reuse any shims that were removed. Tighten to 32 ft. lbs. (43 Nm).
  2. Connect the wiring to the solenoid and install the outer nut.
  3. Place the cover over the starter wiring.
  4. Replace the oil pressure gauge sensor using the special socket.
  5. Plug the electrical connector onto the sensor.
  6. Mount the harness to the retainer.
  7. Install the A/C compressor brace (if equipped).
  8. Lower the vehicle.
  9. Connect the negative battery cable.

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 Chevy lumina van, heat on won't turn off. A/c


Hi wodermom26,

Your Lumina APV is a clone of the Pontiac Transport and Oldsmobile APV's which all have identical Heater & A/C controls. The Heater & A/C controls usually wear out mechanically causing no control of temperature. This is a difficult repair and is best made by a dealers ASE Certified Technician. A/C may require re-charging and or possible replacement of the hoses which carry the refrigerant as they become porous and leak. Additionally, the Compressor and its Clutch may possibly require replacement.

The High beams are controlled by pushing the Turn Signal switch forward toward the Instrument panel and have a momentary "Flash to Pass" function by pulling the Turn Signal Lever upward toward the steering wheel and return to Low Beam upon release of the turn signal Lever. If neither function of the Beam selector lights the High Beams it is pssible that the Headlamp bulbs are burned out or open connections in the wiring harnesses. Do you have an owners manual for your Lumina? If so it has information regarding the Multi-Functions of the Turn Signal Lever.

Rapid Robert

Sep 25, 2011 | 1995 Chevrolet Lumina Apv

2 Answers

1991 Chevy Lumina APV I shouldn't have bought the van. The main thing that needs to be replaced is the bow tie on the front... The current problem is that it feels like the power steering is out, it...


Sounds like the coolant is getting on the belt causing it to slip on the pulleys. As with most 20 year old vehicles leaks are common as very few have received the attention they need [ regular service including replacement of hoses and such ]. You can try a stop leak in the cooling system & leave the radiator cap loose on the first detent, but chances yuor friend is right = the waterpump is leaking. If you use just water in the cooling system it will rust up and sediment will plug the smaller ports causing more problems.

May 04, 2011 | 1991 Chevrolet Lumina Apv

2 Answers

Where is the starter located in the 1991 Chevy Lumina APV ??


97de1d4.gif


REMOVAL AND INSTALLATION
3.1L Engine
Besides regular hand tools, a special oil pressure sensor socket will be necessary to complete this operation.

  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Remove the A/C compressor brace (if equipped).
  4. Extract the wiring harness from the retainer and position it out of the way.
  5. Remove the cover from the starter wiring.
  6. Remove the outer nut and disengage the wiring from the starter solenoid.
  7. Disconnect the electrical connector from the oil pressure gauge sensor.
  8. Using the special socket, remove the oil pressure gauge sensor.
  9. Unbolt the starter from the engine. Retain any shims.

To install:
  1. Install the starter to the engine, reuse any shims that were removed. Tighten to 32 ft. lbs. (43 Nm).
  2. Connect the wiring to the solenoid and install the outer nut.
  3. Place the cover over the starter wiring.
  4. Replace the oil pressure gauge sensor using the special socket.
  5. Plug the electrical connector onto the sensor.
  6. Mount the harness to the retainer.
  7. Install the A/C compressor brace (if equipped).
  8. Lower the vehicle.
  9. Connect the negative battery cable.

Oct 08, 2010 | 1991 Chevrolet Lumina Apv

1 Answer

How do I remove a starter from a 1993 Chevy Lumina Z34


How do I remove the starter from a 1993 Chevy Lumina with 3.1 Liter Engine

Nov 30, 2009 | 1993 Chevrolet Lumina APV

1 Answer

I need to replace the starter on the 1991 Lumina. I cannot find anyone to do it for me. I would like to find out how to do it myself.


You can go to autozone.com and view a full free online repair manual that will show and tell you how to replace the starter.

Nov 24, 2009 | 1991 Chevrolet Lumina Apv

1 Answer

How to change a damaged ignition lock on a 1991 chevy lumina apv


If its like my Beretta which it probably is, try and get another column or just live with it. It's a major pain.

Oct 23, 2009 | 1992 Chevrolet Lumina APV

1 Answer

Where is the oil filter located on a 1993 Chevy Lumina Minivan V6?


it is in the fron of the van between the motor and radiator fan

Nov 28, 2008 | 1993 Chevrolet Lumina APV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...