Question about 1993 Chrysler Lebaron

1 Answer

Cant get to bolt to loosenthe tension on belt to get alternator off on a 93 chrysler lebaron is there a easier way

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Any kind of extensions or what the call positioning adapters that u can use for this/ or whatis in the way please rate my response thank you

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the alternator on 2005 sebring


Will most vehicles, the alternator is located near the top with a belt going directly to it. This makes removal easier as you only need open the hood (bonnet) for access. Disconnect the battery's negative terminal first, and then disconnect the alternator's electrical connector. Loosen the belt tensioning bolt (also serves to affix the alternator) and tap it with a hammer to get it free to move to remove the tension from the belt. Unscrew the bolt completely and the alternator will be off. If you don't have the new alternator with you, put the bolt back in the mounting hole and snug it up so you won' misplace it. Buy a new alternator belt and inspect the starter belt while you at it. It is easier to change both at the same time, but the starter requires you get under the car to loose it from belt tension.

Mar 04, 2015 | 2005 Chrysler Sebring Conv

2 Answers

HOW TO INSTALL ALTERNATOR BELT DIAGRAM


ALTERNATOR/WATER PUMP DRIVE BELT(courtesy of autozone)

On most of the 1981-88 model year engines covered in this information, the alternator/water pump drive belt is tensioned by a screw type tensioner, which makes precise tension adjustment easy.

  1. On 1981-87 models, loosen the locknut, located on the locking screw or lockbolt-located in a slotted portion of the outboard alternator mounting bracket.
  2. On 1988 models, loosen the T-bolt, located in the center of the disc shaped portion of the outboard alternator bracket.
  3. Tighten or loosen the drive belt tensioning bolt. This bolt is tightened to increase belt tension and loosened to decrease it.
  4. When the belt tension is correct, tighten the lockbolt.

jmeredith_2.jpg


this is the 2.2 gas engine, if its different here is a link to the info at autozone
http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528025138b
jm

Jan 10, 2011 | 1986 Chrysler LeBaron

1 Answer

How do u release tension on the alternator belt to put new belt on


there should be tension bolts on the sides of the altinator that you losen to move up or down

Nov 10, 2010 | 1995 Chrysler LeBaron

1 Answer

How do i put on an alternator belt for my 1992 chrysler lebaran.


Turn off your engine and let it cool down. You will have to loosen the alternator bolts and this will loosen the belt so you can remove it. Purchase a belt tension meter and use it when replacing with the new alternator belt. The belt shoud wiggle not more that 1/8 of an inch. If it is too tight it will damage the altenator bearings. If it is too loose it will eventually slip and wear. You may need a helper to hold the alternator while you tighten the bolts.

Aug 17, 2010 | 1992 Chrysler Lebaron

1 Answer

Need to know what a pully is called


That should be the crankshaft pulley.

Jan 06, 2010 | 1993 Chrysler Lebaron

2 Answers

Do you have a diagram on how to install a serpentine belt on a 1994 Chrysler LeBaron?


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Open the hood, the diagram for the serpentine belt is on the cowling.

From DAYCO Catalog
Belt Routing Diagram (Alt., P.S., Idler & Tens.)
9e1b1eb.jpg


From comments to other users and Lebaron Owners; for remove, starting at the alternator pulley and going clockwise around the pathof the belt, the belt drops down and forward and goes under the idlerpulley, continues forward and less steeply downward and goes around thecrankshaft pulley clockwise, rises rearward going over the top or thetensioner pulley counterclockwise, then drops down and around the powersteering pump clockwise and rises to go around the alternator pulleyclockise (which is where I started the description). To loosen thetension to remove the belt, or to give you slack to install the beltwithout having to force it over a pulley while under tension you rotatethe tensioner pulley arm around its pivot clockwise according to the'94 shop manual. It doesn't show by what means to effect this rotation,but in the earlier manual I have ('89) it shows there to be a 1/2"square hole in the tensioner arm into which you insert a breaker barwith a 1/2" square drive which gives you the temporary lever to rotatethe tensioner against its spring action. I assume there is a similar1/2" square hole on the '94 you are working with. Interestingly,between '89 and '94 the idler pulley was added, and the requiredrotation of the tension arm changed from counterclockwise to clockwiseto relieve the tension."

I think this will help you get the belt on. Good luck.

Oct 13, 2009 | 1994 Chrysler LeBaron

2 Answers

Ok I need someone to tell me how to replace a alternator belt for a Chrysler lebaron 2.5 L 1986 ?


moz-screenshot-1.png hopefully this will help you out.....much easier for both of us rather than trying to explain it.e05d456.gif

Oct 13, 2009 | Chrysler LeBaron Cars & Trucks

2 Answers

Where can i find a diagram to install serpentine


Most parts stores can print this out for you for free.

Sep 10, 2009 | 1991 Chrysler LeBaron

1 Answer

Steering belt


the first thing u need to do is loosen bolts on the alternator then pull off the belt put the new one on and then tighten and pull up on the alternator /Thanks for using fix ya Please rate my response thank you very much

Jan 31, 2009 | 1993 Chrysler Lebaron

1 Answer

I am trying to loosen belt to take off alternator but cant get to


Unbolt the alternator and the belt will come with it.

Jan 13, 2009 | 1993 Chrysler Lebaron

Not finding what you are looking for?
1993 Chrysler Lebaron Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...