Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
open the tail gate remove the inside pannel and remove the handle by removing ( might be riveted in) mounting bolts and plastic or metal linkage clips reverse th steps to assemble , if rivet is used drill out the center of the rivets
Posted on Oct 22, 2009
The MAF sensor (Mass Air Flow) is located in in the air induction system usually just after the air filter and before the throttle body, and the ECM (Engine Control Module) uses the signal generated from the MAF sensor to determine how much fuel the engine receives. However, before you replace the MAF sensor you should be certain that there are no air or vacuum leaks in the air induction system especially between the throttle body and the MAF sensor, and also that all of the hose clamps are all good and tight on the air induction boot especially between the throttle body and the MAF sensor, and check if the air flow is being restricted from the air cleaner side of the MAF. (check the air filter and check the air intake to the air cleaner for any obstructions that might be restricting the air flow to the MAF)
You can also clean the MAF sensor with carburetor spray because they build up a very fine dust on the air velocity sensors that are mounted on wires that are suspended in the air stream to monitor and determine the amount of air flow into the engine, and when the MAF sensor becomes dirty the MAF sensor will loose performance. Be very careful when cleaning the air velocity sensors inside of the MAF sensor because they are very delicte and are easily damaged, and do not touch them with anything other than the spray from the carburetor can and that is all that is necessary to clean the air velocity sensors. Here are some images that I have put together to assist you.
Posted on Jun 22, 2010
Tips for a great answer:
Aug 06, 2016 | Ford Cars & Trucks
Jun 10, 2016 | Cars & Trucks
Dec 27, 2015 | Cars & Trucks
Aug 09, 2015 | Cars & Trucks
Nov 28, 2011 | 2005 Chevrolet Avalanche
Dec 16, 2009 | 1999 Chevrolet Silverado 1500
Dec 04, 2009 | 1999 Chevrolet Silverado 1500
Oct 28, 2009 | 2004 Dodge Ram 1500
Oct 22, 2009 | 2005 Chevrolet Avalanche
Oct 16, 2009 | 2005 Chevrolet Avalanche
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: