Question about 2006 Chevrolet Trailblazer

Open Question

2006 trailblazer horn

Horn does not work in steering wheel

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: INTERMITTANT HORN

The rotoating contact for the horn is defective, you must remove the steering wheel to access and replace it.

Posted on Sep 22, 2008

  • 24 Answers

SOURCE: I have a 69 camaro the problem is the horn does

On most early U.S. cars the horn button only provides a ground for the horn relay , which is located on the firewall under the master cylinder , if you can gain access to the back side of the horn button I would ground the wire to see if your horn honks . If not check for power at the horn relay . I would invest in an assembly manual/ service manual from any of the many camaro restoration companies as it could provide insight on future problems

Posted on Mar 14, 2010

tripletauto
  • 1450 Answers

SOURCE: 1986 chevy c10 truck. pulled steering wheel to

THE horn piece should turn with the wheel lock plate. if it does not then something is not installed properly

Posted on Apr 12, 2010

  • 361 Answers

SOURCE: my horn is not working

wiring in steering wheel is broke or loose

Posted on Aug 30, 2010

Testimonial: "thanks a lot, this was very helpful and fixed the connection problem."

SOURCE: steering wheel sensor part number 2006 trailblazer

Ask at dealer parts counter

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horn on 2006 Mitsubishi Lancer is possessed!


the problem will be a short in the horn connection under the steering wheel
probably the horn wire is shorting out when you turn the wheel
the fix is to pull the steering wheel and fix the problem

Aug 29, 2016 | Mitsubishi Cars & Trucks

1 Answer

Horn and steering wheel controls not working.


    images for 2004 Suzuki Forenza no controls on

    Suzuki Steering Wheels and Horns ' eBay

    www.ebay.com/sch/Suzuki-Steering-Wheels-and-Horns/.../i.html
    eBayFind great deals on eBay for Suzuki Steering Wheels and Horns in Steering ... 2004Suzuki Aerio Grey and Black Steering Wheel with Airbag OEM 2003 ... 04 05 06 07 08SUZUKI FORENZA- Steering Column, Black with Key, NO AIRBAG ... 2006 Suzuki Aerio Gray Leather Steering Wheel with Controls OEM 05 06 07 Nice.

Sep 25, 2015 | 2004 Suzuki Forenza

1 Answer

2006 ford fusion, steering wheel has horn, cruse control that doesn't work, is their a fuse


I would think the clock spring is bad ,the clock spring is ribbon wire wound in side a plastic body inside top of steering column. The steering wheel has to be removed to get at it. It is used so you can turn the steering with out losing power for the horn and cruise control. How cars clock spring works

Jan 19, 2015 | 2006 Ford Fusion

1 Answer

What do i do if my horn does not work in my 2006 sebring convertable


check horn fuse and relay.if both good hot wire horn if it works the horn button pad need replacing meaning you have to replace the whole horn pad and airbag in the steering wheel.if horn dont work when hot wired more likely horn is bad.

Apr 17, 2013 | 2006 Chrysler Sebring

1 Answer

Horn will not shut off, 2006 PTcruiser


Clock spring in steer wheel faulty possible. dealership should only work on this because of airbag in steer wheel assembly.

Apr 08, 2012 | 2006 Chrysler PT Cruiser

1 Answer

2006 Subaru Outback horn will not blow in center position but will blow if wheel is rotated to either side approx. 45 degrees. Horn will blow if rotated 360 degrees from centered position


There is a "clock spring" that allows current to get from your horn button, through the steering wheel. Due to the spinning of the steerring wheel. This is a wound up flex circuit, and they can break. Sounds like yours has an issue. It's located behind the steering wheel and air bag.

Sep 08, 2011 | 2006 Subaru Outback

1 Answer

The horn on my 2006 Nissan Murano works only when the steering wheel is turned either direction, even if only a few degrees. When the steering is centered or near centered it does not work.


Its a short in the wiring.Its a wiring issue.You'd need to take of the covers above and below the steering wheel. Just get the horn wiring removed and reconnected.If its getting disconnected at when you center the steering wheel then the wire has to be connected. The horn contacts in the steering wheel became corroded. This is a common issue caused in many cars.The horn connections become lose or get pulled out due to loose.so removing the horn connections/cleaning and reconnecting the connection helps.

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Sep 16, 2010 | Nissan Murano Cars & Trucks

1 Answer

My horn doesn't work.air bag light is on.and no other buttons on the steering wheel work.


Sounds like you have faulty clock spring, it is located under steering wheel and allows for a rotating electrical contact for the airbag, horn (in many cases) and any other steering wheel mounted electrical push buttons. hope this might help you.

Feb 06, 2010 | 2006 Chevrolet Cobalt

1 Answer

My horn quit honking on my 2006 chrysler pt crusier..


find the horn ,it should be at the front possibly behind the bumper ,run a wire direct to it and see it works ,if it does work then its the wiring in the steering wheel ,but as this vehicle no doubt has an air bag then entrust this job to a garage because if you get it wrong the air bag will explode ,expensive job to say the least

Jan 02, 2010 | 2006 Chrysler PT Cruiser

2 Answers

Horn does not work fus not blowd


check for connections and power at horn with someone helping u if power, horn bad if no power recheck fuse and horn switch

Oct 25, 2009 | 2006 Volkswagen New Beetle

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...