Question about 2001 Dodge Intrepid

1 Answer

2001 Dodge intrepid steering console

I was just curious to know, by any chance would you have any instructions to get to the copper plate?

ive tried to get down there long ago, but was afraid of breaking something.

Once again thank you for your help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

I have done this in dodge a mini van
same set up
disconect the battery
reomve the 4 / 10 mm bolts from the back of the steering wheel for the airbag.
lift the airbag from the wheel.
remove the plug in for the bag.
then there is a 18 mm bolt for the steering wheel nut to remove
then you need a wheel puller to remove the steering from the shaft.
then you will see the brass contacts on the clock spring.
this you Will see built up with hair and dust and will need to be cleaned.
reverse to put back together.
not to many parts.

RD

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Dodge Intrepid - is the Electronic Flasher module located on the steering column or under the dash - if under the dash - where?


I am having trouble disconnecting the electronic flasher on my 2001 dodge intrepid. I have tried to use the release clip but I am having no luck. Suggestions?

Feb 23, 2011 | 2001 Dodge Intrepid

1 Answer

Throttle sticking on 2001 dodge intrepid


I would spray some WD-40 on the throttle cable, also, you may need to clean the throttle body and throttle plate, sometimes there will be some carbon build up that will make the throttle plate stick in the throttle body, Gumout and an old toothbrush works good.

Jun 02, 2010 | 2001 Dodge Intrepid

1 Answer

My check engine light says that my primary and secondary cylinders arnt firing, can anyone tell me the firing order so I know what ignition coils to change


Check this firing order for all Intrepid engines...

2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "R"
or
2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "U"
or
2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "V"
or
2001 Dodge Intrepid 3.2 liter SOHC V-6 VIN "J"


5d41214.gif


Hope helps (remember rated this).

Apr 08, 2010 | 2001 Dodge Intrepid

1 Answer

How do you remove the radio


Here you can find two reference guides:
- Dodge Intrepid 1998-2004 DG-50-98
- Dodge Intrepid 1993-1997

Hope helped with this (remember rated this help) Good luck.


Oct 23, 2009 | 2001 Dodge Intrepid

1 Answer

2001 Dodge Intrepid Serpantine


Loosen the tensioner pulley adjusting bolt under the power steering pump.

May 23, 2009 | 2001 Dodge Intrepid

2 Answers

2001 Dodge Intrepid Cooling Belt broke


The engine size and make and model would tell you what kind of belt to order call your local parts store and they will tell you

Mar 25, 2009 | 2001 Dodge Intrepid

1 Answer

2001 Intrepid Steering console out


Hello
Your buttons on the steering run threw a clock spring contact pad this is brass many times will loose contact here. disconnect the battery remove the airbag then the wheel, This will expose the clock spring contact points. Give this a good cleaning,
RD

Jan 13, 2009 | 2001 Dodge Intrepid

2 Answers

1997 dodge Intrepid: inner tie rod


To Steering Gear Bolt 90 Nm (66 ft. lbs.) Jam Nut 75 Nm (55 ft. lbs.)
NUMBER: 19-001-01
GROUP: Steering
DATE: Mar. 23, 2001
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 19-003-00 REV A, DATED OCTOBER 6, 2000 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE PART NUMBER CHANGES AND ADDITIONAL MODEL YEAR.
WARNING: FAILURE TO ACHIEVE A MINIMUM TORQUE OF 100 NM (74 FT. LBS.) MAY RESULT IN THE ATTACHING BOLTS LOOSENING AND FRACTURING. THIS COULD RESULT IN A SUBSEQUENT LOSS OF STEERING CONTROL. BENDING THE RETAINING TABS ALONE WILL NOT PREVENT THIS.

SUBJECT:
Loose Steering

OVERVIEW:
This bulletin provides service procedures and parts information for the inner tie rod bushings.
MODELS:
1993 - **2001 ** (LH) Concorde/Intrepid/LHS/New Yorker/Vision/300M
SYMPTOM/CONDITION:
Loose feel or clunk in the steering wheel as the wheel is moved from side to side.
DIAGNOSIS:
Observe the inner tie rod to steering gear attaching point while moving the steering wheel from side to side. If there is movement between the gear and inner tie rod, perform the Repair Procedure. If no movement is evident further diagnosis of the condition will be required.
DISCUSSION:
The inner tie rod bushings have previously been serviced with the tie rod assembly. This bulletin releases the parts, service procedures, and special tool necessary to service just the bushings. Subsequent service manuals will contain the Repair Procedure.

Jan 13, 2009 | 1994 Dodge Intrepid

3 Answers

2001 intrepid cv joint removal and replacement


bearings make growling noises and axles cv joints make a flutter vibration when accelerating or decelerating

Oct 07, 2008 | 2001 Dodge Intrepid

Not finding what you are looking for?
2001 Dodge Intrepid Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...