Question about Buick Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like the clip on the rear output shaft its probably broke. do this by removing the rear driveshaft, and the tail of the transfer case, there are 4 bolts holding it in place. then grab the output shaft and see if it has any front to back movement. if so pull it all the way to the rear and you should see a groove at the front part of the shaft where the clip goes. Then you should find the pieces fo the clip in the tail housing. One person said he found the replacement clip at a local tranny shop. I am calling the dealership parts counter for a new clip for my 97 Tahoe tomorrow. Hope this helps..
Posted on Mar 15, 2009
SOURCE: my 1997 ford explorer has
i recommend that you check your brakes 1st try to determine whether the grind you hear is from front or rear or maybe under the center of your vehicle. you may have a bad universal joint also, does it pop or crack at all when you shift out of park on a hill? or when you turn ono way or another on a hill? if none of these i suggest you consult your mechanic for further evaluation. hope this helps and thank you for choosing fixya.com
Posted on Nov 12, 2010
Sounds like your u-joists are dry and if they're dry they should be greased or replaced . There also could be a rock or some other object in your rear brake.
Posted on Feb 12, 2011
SOURCE: my 2004 dodge neon sxt
I had the same problem with a Saturn I had and I would check the motor mount. If its coming loose it can damage a lot of other things costing more than what you would need.
Posted on Sep 19, 2011
Check the front engine mount..If its bad it could make a noise while turning or reverse..Hold the car in gear with your foot on the brake and carefully raise the engine ..do it in both reverse or forward and look for excessive movement..
Posted on Sep 22, 2011
Testimonial: "The problem was the upper engine mount. It took me about 20 minutes to replace it, grinding went away. Thanks for the info."
Tips for a great answer:
Apr 25, 2014 | 2002 Mitsubishi Montero Sport
Oct 08, 2012 | 1999 Chevrolet Camaro
Oct 06, 2012 | Buick Regal Cars & Trucks
Sep 22, 2011 | 2003 Ford Focus
Oct 23, 2010 | 1986 Buick Regal
Jul 08, 2010 | 1998 Buick Park Avenue
Apr 16, 2010 | 1996 Jeep Grand Cherokee
Aug 06, 2009 | 2003 Dodge Grand Caravan AWD
Jan 08, 2009 | 1999 Buick Regal
49 people viewed this question
Usually answered in minutes!