Question about 2006 Chevrolet Colorado

1 Answer

Removing radio from dash

How do i get to the screws to take out radio

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers

Take the bezel off the dash they should just clip in there. Then you should be able to access them. Hope this helps

Posted on Jan 13, 2009

4 Suggested Answers

darjr
  • 378 Answers

SOURCE: radio removal

check if there a small hole in each side of the radio, insert a small screw driver in each hole then pull the radio. If no holes , check you dash if there a knobs for a/c remove the knobs there is a nuts hidden under it.

Posted on Jun 11, 2009

ZJLimited
  • 17970 Answers

SOURCE: how do you remove the radio

Here you can find two reference guides:
- Dodge Intrepid 1998-2004 DG-50-98
- Dodge Intrepid 1993-1997

Hope helped with this (remember rated this help) Good luck.


Posted on Oct 23, 2009

bigguy810
  • 448 Answers

SOURCE: want to remove dash front to change radio how do i

yes just look very carefully be for you start pulling and you shooed be fine bob

Posted on May 02, 2011

Testimonial: "tks for yr help. wasn't sure how to go tks again."

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removeradio 1991


You will have to remove the plastic dash from around it. Some of them just snap out others require removing screws from the entire front dash panel around the instrument cluster. once the front cover( s) are removed You should see 2-4 7mm screws holding the radio assy to the dash. when you remove them the radio should pull out and you can unplug the wire harness and antenna

Sep 11, 2014 | GMC Sonoma Cars & Trucks

2 Answers

How do i remove the factory radio on my 1983 cadillac fleetwood


Hi there,

Locate and remove two (2) phillips screws that secure the top of the plastic panel that surrounds the radio. The plastic dash panel will pull off once the screws are removed as shown in the photo above.
The front of the radio is held in with two (2) 7mm bolt screws at the top of the radio. Remove the 2 bolt screws.
There is a hidden radio that secures the rear of the radio and is located under the radio. Pull the ashtray to its extended position. You will need to lay on your back or side and look behind the ashtray, up to the bottom of the radio.
Once the ashtray has been pull to its extended position, you should be able to locate and remove one (1) 7mm bolt screw as seen in the photo above.
Once all screws have been removed, the radio can then be removed. Pull firmly on the radio to remove it from the dash. The radio will most likely resist pulling from the dash. The antenna cable which plugs into the rear of the radio is very short and gives the radio resistance when trying to pull the radio out of the dash. Continue to pull firmly and the antenna cable will unplug itself as the radio is pulled from the dash.
Unplug (1) blue, (1) white, and (1) black wire harness connector(s) from the rear of the radio. There will also be wires extending from the rear of the radio with a plastic connector attached to the wires about 4 inches from the rear of the radio. Unplug this small connector. The radio can now be completely removed from the dash. Set it aside. You will need to remove the plastic brackets attached to the top and bottom of the GM radio. This will be shown in detail in the "Mount New Radio" section.

Hope these helps....

Jan 23, 2011 | Cadillac Fleetwood Cars & Trucks

1 Answer

Dash removal on 1006 mercury grand marquis


Hello, to remove the dash follow this steps:

1. Pry all the woods pieces off of by pulling them away from the dash.

2. Use two ford radio removal tools to remove the radio in the marquis. Place one tools inside two of the four holes in the front of the radio, and the other tools in the other two holes,Pull them away from each other and out of the dash board. Disconnect the wiring harness from the back of the stereo.

3. Remove the screw surrounding the radio using a Phillip head screwdriver. Do not forget to remove the two on the other side of the radio.

4. Remove all the screw around the instrument cluster using a Phillip head screwdriver.

5. Use the steering wheel tilt level to tilt the steering wheel all the way down .

6. Gently pry out the dash , making sure to disconnect the two wiring harness behind the dash board panel before pulling it out completely.

Thanks

Aug 24, 2010 | 2003 Mercury Grand Marquis

1 Answer

How do you get the stock radio deck out of a 1991 buick park avenue?


*It's a bit tricky but not difficult, if you know how the dash in the Park Avenue is put together. But before you do anything, safety first. *Disconnect the negative cable from the battery before doing any electrical work on a car. This prevents shorting out your cars electrical system.

*If you own the 90 -91 Park Avenue model, simply pull off the decorative trim away from the radio to expose the torq screws that hold the radio into the dash. You will need a torq screwdriver of the right size to remove the radio.
Available from your local autoparts store.

*If you own the 91-92 model, it's a whole different ball game. This since the dash is much more tightly compacted. It's a combination of a snap together assembly and Torq screws. The dash is held together in columns or sections.

*The torq screws on these models are hidden behind the heater vents in the upper dash. First pry the wooden trim (Which surrounds the climate control module) on the bottom of the dash off, gently but firmly until it comes free, exposing the Torq screws on the lower dash. Remove the heater vents (hiding the upper screws ) by popping them out with a straight blade screw driver. Then remove all Torq screws visible to the eye, only from the column that is holding is holding the radio in place.

*You will then be able to remove the black colored plastic off the dash to expose the radio. (Use care when removing the lower dash column as some climate control and airbag sensors might be embedded).

*Remove all Torq screws holding the radio in place, (and keep track of all screws) pull the radio out of the dash, and disconnect electrical connectors. If you'll be replacing the stock radio with a non factory radio, make sure all electrical connection watch up, since security feature in the radio are integrated into the radio. (some of these effect basic function on your vehicle like the headlights) If you will be reinstalling the stock radio, you will have to have it unlocked by the dealership. The DelcoLoc system will now think the radio is stolen, because of it's internal security features. Installation is the reverse of removal.

Hope this helps.

May 20, 2010 | 1991 Buick Park Avenue

1 Answer

Car radio removal


remove dash face plate around radio there will be small screws or studs with nuts around the sides of radio attached to a mounting plate. Unhook wire harness on radio and pull from dash

Mar 02, 2010 | 1995 Geo Prizm

1 Answer

How do you take out the radio


Disconnect the negative battery terminal to prevent an
accidental short circuit. Remove the plastic trim piece to
the left of the glove box and (1) phillips screw exposed.
Unsnap the top edge of the knee bolster panel. Remove
(1) phillips screw from the panel. Remove the ashtray
cluster and (2) phillips screws from each side. Unclip the
entire dash trim bezel and remove.Open doors and
unsnap end caps from each side of dash. Unsnap and
remove radio/instrument cluster panel. Remove (3)
screws in order to remove radio.
Disconnect the negative battery terminal to prevent an
accidental short circuit. Unsnap and remove dash bezel.
Remove (3) 9/32" screws and remove radio.
1
BUICK Rendevous 2002-2007

Feb 11, 2010 | 2002 Buick Regal

1 Answer

Changing out the radio on 1996 buck century


Remove the hex screws from the lower section of the dash, under the steering column. This will reveal more screws that hold the wood tone panel down. There are more screws visible just under the top of the dash, look carefully as the upper screws, so you do not remove more than you need. Carefully, twist the woodtone panel around the steering column and remove. You will see 2 more hex screws to the right of the radio that hold the black plastic cover just to right of the radio. Carefully pop that cover off to reveal 2 more screws that hold the radio in place. Remove those 2 and the 2 on the left and you can pull the radio forward to unhook the harness and antenna wires.

Sep 26, 2009 | 1996 Buick Century

1 Answer

How to remove the radio?


Remove screws from dash trim. Remove dash trim. Next remove screws from radio. Pull out radio then disconnect wires.

Jul 10, 2009 | 1994 Dodge Grand Caravan

1 Answer

Radio removal


check if there a small hole in each side of the radio, insert a small screw driver in each hole then pull the radio. If no holes , check you dash if there a knobs for a/c remove the knobs there is a nuts hidden under it.

Jun 11, 2009 | 1995 Plymouth Grand Voyager

1 Answer

How do I remove the radio from a 1998 Honda CR-V?


UNSNAP PUSH-PIN FASTENERS FROM BOTTOM OF CENTER CONSOLE
AND REMOVE BOTTOM PANEL.
2. EXTRACT 4 SCREWS FROM BOTTOM EDGE OF BEZEL. EXTRACT 4
SCREWS FORM INSIDE DASH BELOW POCKET. PULL CUP HOLDER/
POCKET ASSEMBLY OUT OF DASH AND REMOVE.
3. OPEN GLOVE BOX AND REMOVE STOPPERS. EXTRACT 2 SCREWS
FROM RIGHT SIDE OF CENTER DASH BEZEL..
4. FROM BELOW STEERING WHEEL EXTRACT 2 SCREWS FROM BOTTOM
EDGE OR PANEL, UNSNAP UPPER EDGE OF PANEL, UNPLUG, AND
REMOVE.
5. UNSNAP TOP EDGE OR CENTER LOWER BEZEL, UNPLUG, AND REMOVE.
6. EXTRACT 2 SCREWS FROM SIDES OF POCKET.
7. UNSNAP RADIO/AC CONTROL DASH BEZEL, UNPLUG, AND REMOVE.
8. EXTRACT 2 SCREWS FROM EACH SIDE OF THE RADIO BRACKET
ASSEMBLY TO REMOVE RADIO FROM DASH/AC BEZEL.

Apr 09, 2009 | 1998 Honda CR-V

Not finding what you are looking for?
2006 Chevrolet Colorado Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...