Question about 2007 Mazda MPV
How big is the fuel tank please?
My 2007 mazda MPV has a 65 ltr fuel tank. Unsure about earlier models.
Posted on Dec 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Courtesy of: forums.mazdaworld.org
Try this, it works on several 2002 models:
Step 1: Open drivers door and leave open.
Step 2: Lock and unlock the drivers door using the power door lock switch on the door.
Step 3: Insert key into the ignition.
Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.
Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).
Step 6: ECU should respond by locking and unlocking the doors.
Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.
Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.
Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done
Posted on Feb 21, 2009
Why was this suggested? Did water get in it or another substance? If it's just been sitting in a safe place and it runs fine u should be ok. Go get some gas treatment and put it in there.
Posted on Mar 19, 2009
The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.
Posted on Jun 08, 2009
Don't drop the gas tank. Pull back the carpet in front of the rear seat and there will be a square cover closer to behind the passenger seat with 4 screws holding it down. Remove that cover and it will expose your fuel sending unit cover. This will be circular in shape with 6 or 8 small philips head screws holding it in place. Unfortunately they will probably be very rusty and hard to get out. You will first need to disconnect the electrical plug and the 2 fuel lines. After removal of the fuel lines and the screws carefully remove unit to expose fuel pump.
Posted on Apr 16, 2010
Tips for a great answer:
Apr 18, 2015 | 2003 Mazda MPV
Aug 18, 2014 | Cars & Trucks
Feb 27, 2011 | 2004 Mazda MPV
Jan 24, 2011 | 1989 Mazda MPV
Jul 13, 2010 | 2004 Mazda MPV
May 15, 2010 | 1991 Mazda MPV
May 11, 2010 | 1997 Mazda MPV
Apr 05, 2010 | 1995 Mazda MPV
Mar 18, 2010 | 1997 Mazda MPV
May 05, 2009 | 1997 Mazda MPV
Jun 15, 2017 | 2007 Mazda MPV
120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: