Question about Renault Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: S60 HEADLAMP BULB CHANGE
I have had the same problem and have managed to Fix it!!
Just behind the headlamp is a black box that contains the engine management units. You have to remove some of this box......First unclip the two clips nearest to the engine and remove the top cover of the box. Then there are another two clips one by the wing and one by the engine that will release the lower section of the box. You will need a large flat screwdriver to open the final clip at the front of the box and, with some care, you can remove the lower part of this box. The engine management units ( the two silver boxes inside the balck box) will be left in place and should be disturbed as little as possible.
When this is done you can get access to the bulb. First remove the rubber cover from the rear of the light assembly. Then you need a flat mirror so that you can see inside the headlamp to see the connector, clip and bulb. Pull off the connector to the bulb - you must do this with the bulb still in place (you will not be able to remove it with the connector still fitted). Then you have to push the clip at the top to unlatch it and allow it to hinge down away from the back of the bulb. I bent an old screwdriver to 90 degrees and filed a small notch in it to help me push the clip and unlatch it. Note which way up the bulb comes out so that you can fit the new one the same way up. I know it will only go in one way but getting it correct first time saves messing about for ages! With the new bulb fitted, push up the clip and latch it in place again. Then fit the connector and test it before you refit the rubber cover and the black box. Remember to take care when removing and refitting the black box. It does come off - honest!
Posted on Mar 14, 2009
Posted on Oct 30, 2009
The headlight is a Halogen that comes out the back.
Find the wire harness and follow it to the back of the light to a rubber cover. Pull the rubber cover off the back and find a holder. Unscrew or releade the wire "spring" then pull out the old bulb.
BR SURE NOT to touch the glass part of the new bulb.....
Posted on Jan 02, 2010
Tips for a great answer:
Oct 28, 2010 | 2006 Buick Rainier
Aug 14, 2010 | 2008 GMC Sierra 2500HD 2WD
Jul 20, 2010 | 2002 Chevrolet TrailBlazer
Apr 02, 2010 | 2005 Ford Five Hundred
Jan 11, 2010 | 2006 Chrysler Sebring
Oct 14, 2009 | 2002 Chevrolet TrailBlazer
Jul 10, 2009 | 2004 Chevrolet TrailBlazer
Jul 05, 2009 | 1991 Mercury Sable
Jun 13, 2009 | 2006 Pontiac Grand Prix
Mar 21, 2009 | 2003 Dodge SRT-4
1,216 people viewed this question
Usually answered in minutes!