Question about 1999 Dodge Ram 2500 4WD

Open Question

Is the fan clutch on a 2005 chevrolet c 5500 duramax right or left hand threads

Need to know if the fan clutch nut on a 2005 chevrolet c 5500 with a duramax is right or left hand threads

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wyatt1582
  • 453 Answers

SOURCE: How do i determine whether the fan clutch is left

It's counter clock wise. Getting it lose will be hard but it can be done. What I do is clamp vise grips on the pulley then unbolt fan.

Posted on May 07, 2009

Ad
  • 7353 Answers

SOURCE: fan clutch 2001 3.9L Dakota. left or right thread

goes left to come off. its right hand thread

Posted on Oct 20, 2009

Testimonial: "fast and accurate, thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan clutch retaining remove


Use a screwdriver between two of the 4 waterpump nuts while wrenching on the big nut. Possible left hand thread, call the dealership and ask for service department to see if it is L/H thread. hope this helps.

Oct 19, 2013 | 2005 Isuzu Ascender

2 Answers

Ford ranger fan clutch


There may be a tool, or you jam a metal tool between two metal parts.
check these out:


Removing Stubborn Clutch fan Ranger Forums The Ultimate Ford Ranger...

Fan clutch removal


Apr 11, 2017 | 1993 Ford Ranger SuperCab

2 Answers

Is the big nut holding the fan to the clutch right hand, (right to tighten,left to loosen)? 1993 navajo


You mean standard or reverse thread?
Usually crank nuts are reverse thread in relation to the direction of the pulley.

So if the pulley\engine spins clockwise then the nut is probably going to loosen by spinning it counterclockwise.

Afterall it would do no good to go down the road and have the rotation of the engine spin the nut off of the crank pulley eh?

Feb 03, 2012 | 1993 Mazda Navajo

1 Answer

I need to know which direction the fan bolt turns to get it off a 2002 trailblazer with a 4.2 vortec egine


It is probably left-hand threads, meaning turning it clockwise will loosen it. This may sound silly but, if you can see any of the threads from straight above....if threads run "downhill" from left to right its left hand threads, if threads run "downhill" from right to left its right hand threads. The bolt or nut on fan clutches are tough to loosen any way. You can't hurt it easily. You might try smacking the end of the wrench with a mallet. Hope this is clear as mud!!

Aug 23, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

I`m changing the water pump in my 1999 dodge ram 1500, but I can`t lose the fan nut that is attach to the water pump.please help.


Those fan nuts are just tough to get off, however it may have "left-hand" threads. If you can see any threads, look straight down at them...if threads are going "downhill" from right to left, then they are common right-hand threads, Lefty lucy-Righty tighty. However if the threads are going "downhill" from left to right, then they are left-hand threads, and you will need to turn the nut "clockwise" to loosen it. Hope this helps....let me know either way!!

Aug 12, 2011 | 1999 Dodge Ram

1 Answer

How to remove fan from 2001 chevy S10


It depends on what engine you have and if it has AC or not. Some you unbolt the fan from the clutch 2.2 2.4 with on AC with AC you need to unbolt fan from pulley with the clutch 4;3 you have to remove fan and clutch at the same time by loosening the large nut that is threaded to the water pump shaft its right handed thread and thats with or with out AC

Dec 29, 2010 | 2001 Chevrolet S-10

1 Answer

Is the large nut between the fan and the water pump left or right thread?


To remove fan clutch, remove counter o'clock wise.Keep the belt on so it holds some what the pulley, while trying to remove fan clutch.

Aug 23, 2010 | 1996 Chevrolet K1500

1 Answer

Fan clutch removal


the four bolts holding the fan clutch to the water pump pulley are loosened counter clockwise. If you don't have a pulley holding tool at hand, use a wrench(closed end side) as a locking leverage on the studs(do not place the wrench on the nuts) while loosening the nuts 1 by 1 with another wrench. When reinstalling use the same method, but place black elec tape over the studs(prevent thread damage) after you hand tighten the bolts for the fan clutch. hopefully this helps

Jul 20, 2009 | 1994 Toyota Pickup

2 Answers

Fan clutch removal


crank the engine and see wich way the fan turns and that's the way to loose it if turns to rt it looses to rt if to the left it looses to the left

May 24, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...