Question about Mitsubishi Cars & Trucks

1 Answer

Repair Van sliding door runner

We have a 99 Mitsubishi Express Van & one of the sliding doors keeps coming out of the top runner just as you close it. It is a bit rusted & it looks like the small lip that the roller sits on is either bent out or missing (rusted off probably). Is there anyway that we can fix this without spending a fortune?? (The door will be permanently closed, but need it fixed for roadworthy) Thanx!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 645 Answers

If the Pontiac Trans Sport Van door is in the process of closing or opening (via motor), and the vehicle's ignition is engaged prior to the door fully closing or opening, the motor immediately stops. At this point, the only recourse is to manually close the door, as none of the power switches/handles respond again until the door has been manually closed. ----------------------------------------------------------------------------------
Car cable & OBD Connector

Posted on Dec 12, 2012

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: side sliding door on 99 ford windstar

keep playing with the adjustment is what i did,back and fowot

Posted on Dec 12, 2008

  • 750 Answers

SOURCE: Door was hit on a pole and bent almost straight

replace the door with a new unit,if money is a proplem, try a used one from junk yard should be cheeper than a new one jus have to get it to oa body shop to paint

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi express van from 95. When I close and lock the passager door ( with the inside button or the key ) i can open it with the outside without unlocking it. From the inside i can't. Any idea ?


possible child lock level on the door that has been moved to the lock position check door for a child lock on the edge of the door that closes in contact with the body of the car when you close it..

Apr 26, 2015 | Mitsubishi Cars & Trucks

1 Answer

The sliding door will not close


check for something stuck in the runners.

Dec 21, 2013 | 2001 Chevrolet Astro

1 Answer

Sliding door kia carnival gets jammed


If the slide arm is just loose, you should be able to tighten it, as long as the arm wasn't rivited in place.

Mar 17, 2013 | Cars & Trucks

1 Answer

Misubishi L300 sliding door


Any year door between 1979 and present will do, the basic shell of the car - including doors - hasn't changed.
For a perfect fit of the trim you should get one from 79 to 86.

Jun 04, 2010 | Mitsubishi Cargo Cars & Trucks

1 Answer

Rear passenger sliding door wont shut?


Check the bottom weather strip along the frame, it's common for passengers to knock them off it's runners and they fall down preventing the sliding door to close properly.
If it is the weather strip, place some RTV silicon to keep it in place when you re-install the weather strip back in place.
Thank you for using fixya and keep me posted, be glad to help you get your sliding door working 100% again.

Apr 19, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Mitsubishi express van auto electrics


the door switch is not engaged fully. it can be unscrewed out or have the ding repaired.

Sep 16, 2009 | 1993 Mitsubishi Expo 4 Door

1 Answer

?Internal lights on runner


Hit all door latches (part on the door jam that holds the door closed) with a couple shots of WD-40, i found that it is the door sensor that gets gummed up. Worked immediatly for me.

Jan 10, 2009 | 1997 Ford Expedition

2 Answers

Can't find brak fuel tank on mitsubishi express van


on dash in right hand side of steer wheel door must be open though.
little plastic cover says brakes.
pull cover their it is brake fluid resrviour.

Dec 21, 2008 | 1990 Mitsubishi Minivan

1 Answer

Side sliding door on 99 ford windstar


keep playing with the adjustment is what i did,back and fowot

Dec 11, 2008 | 1999 Ford Windstar

1 Answer

My dome lights in 99 Chevy express conversion van don't work when the doors are opened or switched on. The fuse is fine and the lights work if toggled individually but not when doors opened or switch...


Did you check the dome override button? It shoiuld not be pressed in, otherwise the lights won't come on with the door or the dimmer slide switch moved all the way to the top.

Dec 01, 2008 | 2008 Chevrolet Express

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...