Question about 2002 GMC Yukon XL

1 Answer

Running noise won't stop when engine is off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,101 Answers

What is the noise sound like

Posted on Dec 12, 2012

  • 5 more comments 
  • Debbie Steiniger Dec 12, 2012

    possibly an auxiliary fan? It continued to make the noise for 5 hours after shutting vehicle off. My sister drove it home & everything drove ok but stil making noise.

  • teds repairs
    teds repairs Dec 12, 2012

    well if it is the auxiliary fan there is a few things that can make it run long. 1 the coolant temp sensor is bad and telling computer the engine is overheating. 2 the relay is bad and shorting out.3 the fan is bad and will not shut off

  • Debbie Steiniger Dec 12, 2012

    could it have anything to do with the ABS? That light came on at the same time & when the fuse was removed it stopped the noise.

  • teds repairs
    teds repairs Dec 12, 2012

    no unless the noise you hear is the abs motor running

  • teds repairs
    teds repairs Dec 12, 2012

    this is the link to my garage I am on facebook. like to hear this noisehttps://www.facebook.com/TedsRepairs

  • teds repairs
    teds repairs Dec 12, 2012

    if you can not find me it is ted's repairs in connecticut

  • Debbie Steiniger Dec 12, 2012

    downloading it to your FB page right now

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car over heated blew a core plug the power belt came off and stopped now it won't start. Did I blow the engine on my 93 Nissan maxima?


Repair everything and start it up. It it rattles and knocks then yes. If it runs ok and dosen't have any noise it never used to have you may be lucky.

Mar 13, 2013 | Cars & Trucks

1 Answer

Hyundai Iload diesel won't start, have replaced engine in van with changeover from wrecker & it turns over but doesn't fire up


run the scanner to reset the ECM and immobiliser
make sure that the cranking speed is fast
check for air in the system
check that the stop solenoid is connected

Nov 03, 2012 | Hyundai Cars & Trucks

1 Answer

Rumbling noise coming from engine compartment.


engine size, etc., I can only make educated guesses, but here goes: You stated "My car will drive, but very slow hardly moving". My first suspicion is that you don't have a transmission problem, but the car is in what Chrysler calls the 'limp-home mode'. This occurs when the computer 'sees' a problem with an engine function or sensor that is serious, but not so bad that the car won't run at all. Limp-home mode allows your car to only operate in second gear so that you won't damage it further by driving normally, but won't leave you stranded either. Is your 'check engine' or 'service engine' light on? If not, check to see that it actually works by turning the key 'on', but not starting the car. All the dash lights should be lit for about 3-5 seconds. No matter what, you need to check your transmission fluid level (on a Crysler, should be checked with the engine running and in gear, NOT park or nuetral). Safety first, make sure someone is holding the brake on - please don't ever trust a 'parking brake' for this. If the fluid level is OK and there's no 'check engine' light you need
to visit a competent transmission shop. Probabably a worn front pump, torque converter, or a hung spool valve in the valve body, none of which is generally fixable at home. If you do have a 'check engine' light on, see a regular mechanic first as there is a mechanical problem probably not related to the transmission. Good Luck!

Oct 13, 2012 | 2003 Chrysler Sebring

1 Answer

My 2001 dodge intrepid is making noise under the left valve cover


We seen to get a lot of those cars with that issue lately

I don't know the reason, but it won't be fixable without some
major head removal & whatever the dealers & aftermarket
have come up with to solve.

Bad engine design I suspect

Oct 10, 2012 | 2000 Dodge Intrepid

1 Answer

Runs fine then all of sudden it won t start


remove the pump and check for sediment in the pick up gauze filter ,if bottom of tank clean then check the connections on the multiplug ,if ok then drive it till it stops and then check it again as the fault is their but its finding it at the right place at the right time

Jun 16, 2012 | 2006 Chevrolet Uplander

1 Answer

Can it be a fuse why the car won't start


Have you tried replacing earthing cable

Apr 18, 2012 | 1997 Buick Regal

1 Answer

Motor turns over won't start. Cleaned terminals, put in new battery, still won't start. Removed gas cap to vent air on hot day, still won't start. Lights all come on, all electrics appear to...


Your problem may be one of the following:
First check or just replace the fuel filter. Usually located under the car in front of the rear axle, drivers side.
Next, the fuel pump may be worn out. Usually they get loud or stop working (running).
Next, check the fuel pressure regulator. Usually located on the front fuel rail, drivers side.
Is the vacuum line attached? Not leaking or rotted?
Also, do you smell a strong fuel odor when it won't start? May be one or more stuck-open injectors, or the coil pack is bad.
Checking these in the order listed will more than likely fix your problem.
The clicking noise indicates the battery can no longer run the starter, which also means the fuel pump won't run either.

It could be a fuel issue. How old is the fuel filter? Can you hear the pump run for a few seconds when you turn the key on? Try turning the key to ON without trying to start engine three times waiting for the pump to stop running each time. Then try to start the engine. If it starts, Its a form of Vapor lock caused by the extreme heat we have had lately, and a weak fuel pump.

If none of this works, try a new fuel filter first. From there have someone check the fuel pressure regulator and then the pump. If you are in need of a new pump, take my word for it and spend the money to get one from a Dealer, and not from your favorite parts store. Most parts store parts are made in China and they are JUNK.

Aug 28, 2011 | 1997 Chevrolet Blazer

2 Answers

2002 Kia Optima runs great, transmission has started acting irradcally. it will shift and pull in gear for a short time after starting, but after a few minutes it fails to move the car. I've changed...


Keep driving it like that & it won't work at all

When ever you even think you have a transmission
issue,you immediately stop using the vehicle or you
end up rebuilding the trans,your call,your money & lots of it

Ask yourself ---Why would changing the fluid do anything?

Old oil out / New oil in ?

You change trans fluid because it breaks down from the heat
That is it's job,to remove heat or your trans fails

Trans & Power Steering get changed every 3 years & not
over 30,000 miles ever on ALL Vehicles

Jul 27, 2011 | 2002 Kia Optima

1 Answer

My 2000 Sable won't move though gear selector appears to be in tack. Was making a left turn heard a loud pop on the right front side of the car then what appeared to be a rubbing or scraping noise...


the problem has to be in the linkage inside the transmission which means that you have to take into a mechanic to have them fix this because if you do not know how to take the transmission apart yourself is the reason why to take it to the nearest mechanic. Sorry

Jun 09, 2011 | 2000 Mercury Sable

Not finding what you are looking for?
2002 GMC Yukon XL Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...