Question about 2002 Chevrolet Cavalier Coupe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: purge solenoid location
which vehicle are you actually looking for the purge solenoid on? you have 2 vehicles listed in your question. i'll answer both, lol
the locations are described as if you are looking at the engine from the front of the car with hood open.
on the blazer:
it is located on the left side of the intake manifold just under and behind the throttlebody. it is a canister looking device.
on the silverado:
it is located on the intake manifold on the left side in about the same spot as the blazer. providing the silverado has the 5.3 or 5.7 liter engine. if it also has the 4.3 then obviously it will be the same.
hope this helps!
Posted on Feb 17, 2009
there's more than 1 and they are all inside the pan and in the valvebody be careful messing with this stuff it could become very costly very fast. good luck
Posted on Jul 06, 2009
take the six bed bolt loose and then take three buddies slide the bed back put in the new pump slide it back n place and put the bed bolts back in. if u drop the tank u can easily break the hard plastis lines that go to the fuel tank. u only have to take the fill lines and taillight wires loose this way its alot quicker, and easier.
Posted on Aug 07, 2009
Having the same exact problem but with my 1999 escalade. Thought it was the actuator bought a new one installed it transfer case would engage but front end wouldnt lock. Took it out of housing left it plugged in got a friend to go through all the 4wd for me and the plunger never moved out the actuator. Checked my wiring harness which is a four prong ann it had one hot prong like it is suppose to. Traced wires even replaced dash switch same problem. Taking it to local dealership tom to have it checked for codes. I was told it could be the transfercase actuator even though its workin that actuator is what sends power to the front to engage the actuator to lock the differential.
Posted on Sep 16, 2009
Take a small 90 degree pick. Inspect the fitting closely. Use the pick to "roll" the retaining clip off the fitting. The line will simply pull once this is done. U can install the clip first on reinstallation (inspect them closely) and then simply push the line into the fitting. It will "click" into place. Note u will have to orient the line perfectly to push in.
Posted on Nov 13, 2009
Tips for a great answer:
Jun 10, 2017 | Cars & Trucks
Apr 10, 2013 | 2002 Chevrolet Silverado 1500
Feb 23, 2013 | 2001 Chevrolet Silverado
Jul 07, 2012 | 2002 Chevrolet Silverado 1500
Feb 13, 2012 | 2005 Chevrolet Silverado 1500 2WD
May 24, 2011 | 2001 Chevrolet Silverado 1500
Jan 06, 2011 | 2004 Chevrolet Silverado 1500 Crew Cab
Sep 29, 2009 | 2001 Chevrolet Silverado 1500
Aug 26, 2009 | 2001 Chevrolet Silverado 1500
Jul 06, 2009 | 1999 Chevrolet Silverado 1500
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: