Question about 1987 Buick Skylark

Open Question

Frost plug location buick skylark 1991 3.3 v6

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
66 chrgr
  • 1011 Answers

SOURCE: I have a buick skylark 1991 fi it will start and

you have a shorted fuel injector that is taking out the quad driver in the computer that is why i said did you ohm the injectors it should be 4.1 to 4.3 ohms per side anything less will shut off the quad driver in the computer. each individual injector should be 12 ohms

Posted on Mar 04, 2009

Ad
c17hydro
  • 2984 Answers

SOURCE: where is fuse for blinkers on 1989 buick skylark

REPLACEMENT The hazard flasher is located forward of the console on all N-Body vehicles. The turn signal flasher is located behind the instrument panel, on the left side of the steering column bracket. Replace the flasher by unplugging the old one and plugging in the new one. Confirm proper flasher operation.

The flasher is located behind the dash (trim removed for clarity)


b8a3d29.jpg
PLEASE DON'T FORGET TO RATE!

Posted on Jul 15, 2009

  • 636 Answers

SOURCE: 1991 Century Buick V6 starter replacement.

remove the positive battery cable from the post
remove the 3 wires from the starter and the two bolts holding the starter to the block.
reverse the procedure for installation.

Posted on Oct 07, 2009

Testimonial: "I know that there is usually only 2 bolts to remove a starter. I've identified one bolt but was not sure about the location of the other one. Thanks"

  • 43 Answers

SOURCE: spark plug wires aren't corrextly attached to coil

You do not need a diagram. Look at the three coils on the front of the engine. You will see each coil has two spark plug wire terminals and each is numbered. These numbers are the cylinder number that wire goes to. Now look at the engine from the front of the car and see which bank of cylinders are more toward the front of the engine. That bank is #1 -#3 & #4 cylinders, with #1 in the front and in that order. The other bank is #2 , #4 and #6 cylinders with #2 in front and in that order. Connect #1 terminal to #1 cylinder and so on.

Posted on Nov 01, 2009

  • 279 Answers

SOURCE: location of cooling fan relay 1993 buick skylark

Back of firewall,second relay from the passenger side of the vehicle.

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the motor from a 1991 buick lesabre drop into a 1991 buick skylark with no problems


You will run into an issue from the VATS antitheft system of the LeSabre, not working with the key/ignition of the Skylark

Security Help

Dec 31, 2013 | 1991 Buick LeSabre

1 Answer

Where is the oil sending unit on a 1995 Buick Skylark 3.1 V6?


OIL PRESSURE SWITCH

1995 Buick Skylark 2.3L MFI DOHC Quad 4 4cyl

The Oil Pressure Switch is located:

OIL PRESSURE SWITCH

1995 Buick Skylark 3.1L SFI OHV 6cyl

The Oil Pressure Switch is located: Under hood, center, front engine area, front driver side of engine, mounted in engine block

Jan 05, 2013 | 1995 Buick Skylark

1 Answer

My 91 buick skylark will run for a short distance


may be the converter on the exhaust has busted and is constricting the exhaust

Jul 23, 2010 | 1991 Buick Skylark

1 Answer

Location of cooling fan relay 1993 buick skylark 3.3 v6


Back of firewall,second relay from the passenger side of the vehicle.

Nov 14, 2009 | 1993 Buick Skylark

1 Answer

1991 3.3l buick skylark,have spark at plugs,have fuel pressure at rail,but no fuel in cylinders,fuel regulator maybe?


Or maybe as simple as a blowen fuse for the injectors. There should be a fuse for the injectors, either under the hood or inside of car.

Jun 14, 2009 | 1993 Buick Skylark

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...