Question about 2004 Chevrolet Blazer
No heat from floor just the defrost and dash vents
Usually a sign the blend door is not working under the dash. The blend doors direct air thru the vents and the heater core.
Posted on Dec 12, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: There is no air flow
You need part GM Part number 89018675 or ACDelco 15-73596. The Mode Selector Actuator. What happens is the part is a CHEAP part POORLY designed and when it goes to turn the flaps inside the HVAC unit its the plastic gear slips instead of turning the flap!!!
Just to forward you you might want a deal to install this art for you unless your good at fixing your own vehicle, because you need SMALL sockets and a lot of patience to get this part in!!!
The part is ALMOST directly above the steering shaft for your steering wheel, so theres a lot you got to remove before you will even see them!!!
I only recommend you to have a dealer put this part in for you, unless you have your own service manual!!
Because there is 5 of these darn things and if you pick the wrong one you will have to do it all over again!!!
3 on the Drivers side and 2 on the Passengers side!!
But replacing this part SHOULD solve all your problems!! AS it did for me and i was having the same issues as you have described!!
Posted on Jul 22, 2008
These trucks have a problem where moisture builds up in the heater box then freezes. When this freezes and you change your heater settings it breaks the shaft for the blend door. If this is what happened you should be able to look under the dash above and to the right of the gas pedal and you will see two vaccuum accuators one of them you should be able to wiggle around the linkage if it is broke. To fix this you need to remove the entire dash to get the heater box out which involves discharging the AC and draining the coolant because the heater core and evaporator come out. Please rate.
Posted on Dec 13, 2008
the idea of the switch is run on vacuum and is not making contact with the switch it self either worn contacts in the switch itself **** as an obstruction as well or the vent door is stuck in just that position either behind the glove box or the ash tray are the vacuum lines one of them may be pinched off or the door needs a bit of help until you can free it up
Posted on Sep 08, 2009
this problem is caused by a failed HVAC temperature control blend door electric actuator, to replace this part you must remove the entire dash assmbly
Posted on Sep 15, 2009
Some thing you could look at would be this. The control is usually fed by a vacuum line or small hose thats is connected to your intake manifold.
With a cold engine,look for a skinny vacuum hose that runs from the intake toward the fire wall . It should be going inside the cab and connecting to the A/C vent control.Some times the hose becomes disconnected or splits or cracks due to heat under the hood.
Thats usually the trouble.
I hope this helps you.
Posted on Oct 06, 2009
Tips for a great answer:
Nov 14, 2016 | Cars & Trucks
Nov 08, 2014 | 2004 Chrysler Sebring
May 01, 2014 | 2004 Ford Crown Victoria
Mar 09, 2011 | 2004 Chevrolet TrailBlazer
Feb 20, 2010 | 1992 Chevrolet S-10 Blazer
May 23, 2009 | 2004 GMC Envoy
Mar 04, 2009 | 2004 Chevrolet Blazer
Mar 04, 2009 | 2004 Chevrolet Blazer
Dec 13, 2008 | 1996 Chevrolet Blazer
303 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: