Question about Chrysler 300M
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: changing headlight 300m
lift the hood. the light are down behind the light assembly. simply turn large black ring and it will come out. be carefull not to touch the glass on the new one. oil from your skin will cause it to prematurely fail.
Posted on Mar 11, 2009
SOURCE: AC belt on 1999 Chrysler 300M
When you replace the AC belt you really should replace the serpentine belt as well, since you will have to take it off already. If you don't do it now it is inevitable that you will have to replace it in like 3 weeks anyway : )
You need to first remove the serpentine belt by loosening the nut in the center of the idler pulley. After that you will need to loosen the push bolt on the side of the idler pulley. The hub bolt is a 15mm size and the push bolt on the side of the tensioner is a 13mm I think. After you loosen it sufficiently, you will need to pull off the old belt.
Next you will need to loosen the tensioner pulley for the AC belt as well. It is the same process. The main issue is space. You will most likely need to raise your car to get at the right angles to loosen these pulleys.
Once you loosen the idler pulley in the same manner as you loosened the other, you can slip the AC belt onto the back of the crank pulley and route it as the diagram under your hood instructs you. Next tighten up the idler pully in the opposite way as you loosend it...tighten up the push bolt until the belt play is within factory specifications, then tighten the hub bolt in the center of the pulley. Do the same for the serpentine belt and you should be up and running in no time. I just performed these tasks on my 2000 300m and I wish someone would have told me this before I started my project. Hope this helps, Good Luck!
Posted on May 26, 2009
Removal & Installation
Posted on Mar 06, 2010
Hello, Had the same problem but i did just the opposite I put a 2002 engine in a 2000. I found out that the cam sensor spocket (for the timing belt) Has the holes for the cam sensor in a different spots causing all kinds of problems also they did the same with the flex plate so I hope you took the one off the 2002 and used it or you will have to pull it back out and change it. Good luck
Posted on Mar 29, 2010
Tips for a great answer:
Jul 13, 2014 | Cars & Trucks
Jun 21, 2012 | 2000 Chrysler 300M
Aug 24, 2011 | 2004 Chrysler 300M
Jul 13, 2011 | 2000 Chrysler 300M
Jun 14, 2011 | 2002 Chrysler 300M
Jun 13, 2011 | 2001 Chrysler 300M
Dec 22, 2010 | 1999 Chrysler 300M
Nov 15, 2009 | 1999 Chrysler 300M
Aug 15, 2017 | Chrysler Sebring Cars & Trucks
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: