Question about 2003 Ford Explorer

Open Question

06 mazda tribute power windows not working

Driver side works also left passenger works, right side quit working. I can hear a click sound at right side when I press control

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
MobyMech
  • 106 Answers

SOURCE: My drivers side electric window won't work

Hi Hawkeye1973

The first thing you should do is swap the passenger switch in place of the drivers switch and then see if the window now works. If so then you need a new drivers side switch. It may be clicking but it may not be working.

If it still doesn't work then you need to get your hands on a volt meter and get back to me.

TULL FAMILY
You need to remove the drivers door panel and investigate the window mechanism, it sounds asthough its sticking.

Very best regards

Geordie

Posted on Jun 20, 2008

Ad
  • 150 Answers

SOURCE: When the driver's side window button is pressed, there is a "click" sound from the window motor but the window doesn't move.How do I check the window motor and/or the control console?

While holding the button in the down position with the key in the "on" position tap on the window motor with a hammer. Or if the window is down, hold the button in the "up" position. If window starts working when you do this there is most likely a bad spot on the armature in the window motor or the brushes in the motor have worn out. Hope this is helpful. Good luck.

Posted on May 23, 2009

dj_relly999
  • 4070 Answers

SOURCE: Power window not working

a. try removing the door sidings
b. try removing the power window switch control
c. try cleaning the terminals, sometimes when it has dirt the power loses contact

Posted on Jul 02, 2009

shop510
  • 90 Answers

SOURCE: drivers side power window quit working on 99 ford

Bad motor remove inner door panel to get to motor. Pretty easy.

Posted on Sep 27, 2009

Johnny Jeep
  • 6 Answers

SOURCE: 2003 Windstar - Right front and rear windows

Replace the windshiled wiper motors

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power window


Sounds like a passenger switch malfunction.

Sep 08, 2013 | 2009 Mazda CX-9

2 Answers

Mazda 6 passenger window won't go up!!!


It sounds like it could be the window solenoid, or the window motor. It's unlikely the switches on both doors are bad. Check the solenoids and motors...

Oct 16, 2012 | Mazda Cars & Trucks

1 Answer

2003 cadilac deville driver window off track. motor seems to work but window will not go up.


Window regulator is bad in the drivers door . Do you know what a regulator is ? The Trainer 24 Power Window Troubleshooting Do you know anything about automotive electrical testing ? How to read an use a wiring diagram ? Do you know there are two side to a electrical circuit ? B+ voltage an a ground side . Plus there is electronic control modules and class 2 serial data network involved . When you push the switch for a window othen then drivers window on the drivers door . a class 2 message is sent to the other doors modules . The correct module will then open it's window .
http://www.bbbind.com/free_tsb.html Check out free wiring diagram here .Enter vehicle info . year , make , model and engine size. Under system click on body & accessories , subsystem click power windows . Click search button , then click each link one at a time .

Mar 27, 2017 | 2003 Cadillac Deville

1 Answer

I want to change water pump,timebelllting. the engine have 160452 km make:Mazda Tribute year:2001


To replace water pump on your mazda tribute, please click the link below:--- http://technoanswers.blogspot.com/2011/06/how-to-replace-water-pump-on-mazda.html ------------- To replace timing belt click this link below:--- http://technoanswers.blogspot.com/2011/06/how-to-replace-timing-belt-on-mazda.html ------- This will help.Thanks.Helpmech.

Jun 01, 2011 | 2001 Mazda Tribute

2 Answers

My mazda 3 power window switch not working on master switch,but the other are working.except on front left hand poer window switch


I have a 2005 Mazda 3. The driver's side power window won't go down...the other 3 windows do (from the left door power switch). When I try to open the driver's window, I hear a noise...maybe like a motor switch?

Sep 24, 2010 | 2005 Mazda 3

1 Answer

Back window wiper won't work ,05 mazda tribute.don't have manual


Start with the basics. could be something as simple as the fuse. I have a 03 Tribute so i guess it is the same model as yours! if so. The fuse can be found in the fuse box in the passenger footwell. There is a small inspection plastic cover in the kick panel. if you un clip the cover, on the reverse side you will find a tool that clips onto the mini blade fuses to extract them (very useful). Also on the reverse side of the cover is a list of the fuses and to what it relates. The rear wiper fuse from memory is approx a 1/4 of the way down the left column of fuses 10A but just confirm on the list. Mini blade fuses are usually coloured but transparent so you will be able to see if the fuse element is still in tact, but always best to double check with a continuity meter. Hope this helps. Simon.

Jan 16, 2010 | 2005 Mazda Tribute

1 Answer

1998 Toyota Corolla Electric Door Lock Problem


You'll need to replace the solenoid (motor) that doesn't work. Not hard once you get the door panel off. I suggest you buy the correct part, not a universal one.

Jun 12, 2009 | 1998 Mitsubishi Eclipse

2 Answers

New battery in 06 mazda 6


1. Turn ignition switch to "on" position.
2. Open passenger window completely from passenger side window switch.
3. Close passenger window completely from passenger side window switch, and hold switch for an additional 2 seconds.
4. Turn ignition back to "lock" position.

That's it. Works like a champ. And here you thought it was more than just a battery dying....I did.

Aug 11, 2008 | 2006 Mazda 6

Not finding what you are looking for?
2003 Ford Explorer Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...