Question about 2003 Jeep Wrangler
Have charged compressor repaired vacuum line ?
Well this is different since most questions now are about no heat.
If one ac line is cold and the other is warm, I would suspect a blend door under the dash is not working. The blend doors direct air thru the heater core and the vents.
Posted on Dec 12, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try fuel injectors....run a bottle or two with full tank through it and see if that dont solve the problemo.....
Posted on Feb 01, 2009
There is a flap that directs the air. the flap is controlled by a vacuum actuator. This is located inside the venting. The actuator is connected to little vacuum hoses that attach to the temperature control switch. Either the flap is stuck, or the actuator has gone bad.
Posted on Jul 01, 2009
SOURCE: heater blows cold air
the electric motor that open the heat door looses electrical connection there by the door stays on cold / it is located under the a/c heater assembly / which requires removing the whole dash and heater assy// also bleed all air out of coolant system
there are three doors / 1/ a/c heat 2/ mode /defors 3/ recurculation email@example.com
Posted on Sep 11, 2009
Tips for a great answer:
Jun 26, 2012 | 2005 Ford Five Hundred
Oct 20, 2011 | 1997 Jeep Wrangler
Jan 21, 2011 | 1999 Jeep Wrangler
Sep 25, 2009 | 1996 Toyota Celica
Jul 10, 2009 | 2005 Jeep Wrangler
Jun 21, 2009 | 2006 Jeep Grand Cherokee
Nov 20, 2008 | 2003 Jeep Wrangler
223 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: