Question about 2002 Lincoln LS

1 Answer

Lincoln LS 02 AC filter reset

Changed filter and cant reset message

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You have 4 buttons right under your center air vents, the one on the right says STATUS, CLICK IT. Now look on your right hand corner of you dash, it should change options every 3 seconds, when it comes to where it says AC Filter....go back and click the RESET button once. Then look back and it should say to RESET hold that button in this time for about 5 seconds, and it will go back to saying AC Filter 100%....Done!

Posted on Mar 15, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

frcs68
  • 1605 Answers

SOURCE: 2002 lincoln ls

are you handy with tools???
get youself a hayes manual. start there.
if not better let teh pro. do the job.

Posted on Oct 10, 2008

  • 94 Answers

SOURCE: Where is the ac filter in2002 lincoln>

The AC filter is located under the right side cowl panel, the plastic panel between the hood and windshield. To access, remove the push pins and raise the front of the panel.

Posted on Jun 26, 2009

  • 7353 Answers

SOURCE: lincoln ls flywheel

Big trouble. The trans has to come out to access the flywheel.

Posted on Dec 02, 2009

Testimonial: "ouch!!!! thanks"

  • 8 Answers

SOURCE: where is the ac filter and how do i change it on

The "AC Filter" refers to the Air Cleaner Filter. That is in the engine compartment in the air cleaner assembly. The cover is held on by a couple of clips. Undo the clips and remove the cover. Then you can remove the Air Filter and replace it with a fresh one. (Can be purchased at Walmart even.)

Posted on Jan 04, 2011

SOURCE: Ac filter light on a

Push Status Buttom until you get to A/C Filter %

Then press Reset & Press Reset a second time

The oil & a/c status warnings are not tied to anything
They are gadgets,they do not mean you need to service,
change or replace anything

You replace items based on experience,time & mileage

You should make your own schedule for all your vehicles
& have logs books as a reminder.

Posted on Jun 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford explorer trac 2007 change the oil and filter and now have a wrench light on ,how resolve the problem


Sounds like you need to reset your Oil life/ maintenance reminder light. (also, double check your oil level)

To reset Oil life on a standard dash stlye:
1. pres and release the TRIP/RESET button until the message center displays SETUP MENU HOLD RESET
2. Press and hold the TRIP/RESET button for 2 seconds until the message center displays RESET FOR SYS CHECK
3. press and hold the TRIP/RESET button for 2 seconds until the message center displays OIL LIFE xx% RESET IF NEW
4. Press and release the TRIP/RESET button until the message center displays HOLD RESET IF NEW OIL
5. Press and hold TRIP/RESET button for 2 seconds and release to reset oil life to 100%
6. Message center will briefly display OIL CHANGE SET TO 100%


With a message center cluster the procedure is as follows:
1. press and release SETUP button until message center displays PRESS RESET TO BEGIN SYSTEM CHECK
2. Press and release RESET button until the message center displays HOLD RESET IF NEW OIL
3. Press and hold RESET button for 2 seconds and release to reset the oil life to 100%
4. The message center displays SETUP MENU HOLD RESET


Hope this is what you need/ are looking for. Goodluck & let me know how it goes, or if you have a different problem.

Nov 03, 2013 | 2006 Ford Explorer

1 Answer

Where is the fuel reset button for a 2004 Chevrolet Silverado 2500 HD 6.0 L fuel injection?


For vehicle with steering wheel conrtols ,to reset the fuel,Press and hold the select button for five seconds while the fuel filter life message is displayed . The message will appear on the DIC for ten second
For vehicle without steering wheel control ,do the following, without pressing the pedals,turn the ignition key to the on position without starting the engine ,wait five seconds,completely press the the brake and the accelerator pedal simutaneously, and hold for ten seconds ,the system is now reset ,
The next time the engine is started the message will no longer be displayed, Always reset after a fuel filter change

Mar 03, 2012 | 2004 Chevrolet Silverado 2500HD

1 Answer

My change oil light soon light won't go off. My oil and filter were changed 2 weeks ago and my husband forgot to reset it in our 2007 Suzuki XL7. We just bought this car a month ago and the oil li


it wont go away because their is a mechanical problem and or problem with oil change [ not enough oil wrong filter etc ] will need to have vehicle scanned for the fault code to determine the problem most auto stores offer this service for free

May 17, 2017 | 2007 Suzuki XL7 AWD

1 Answer

Where is the cabin filter located?


Hello, the cabin filter is located under the hood on the passenger side. Here is video on how to replace...I hope this helps.

To reset the A/C filter monitoring system to 100% after each A/C Filter change:

  1. Press the STATUS control to access the System Check function, the message center will display A/C FILTER ***% RESET FOR NEW .
  2. Press and hold the RESET control to set to 100% , the message center will display IF NEW FILTER HOLD RESET .
  3. After a successful reset, the message center will display A/C FILTER LIFE SET TO 100% .

Sep 29, 2011 | 2002 Lincoln LS

2 Answers

I have a 2001 LS Lincoln. No owners manual. The dash has a couple of codes on an led type screen for "change AC filter" and "change oil" messages. I did the work but the messages still...


Look for the Information Center panel above the Audio controls.. There should be 4 buttons labeled Fuel, Setup, Reset, and Status. With the engine running, press the Status button until the change oil required message appears, then press and hold the reset button until the message appears that says oil life restored to 100%. Do the same for the a/c filter.

Feb 26, 2011 | 2001 Lincoln LS

2 Answers

How do i reset the oil life on a 2005 gmc c8500


Most often you need a code reader with a reset function that can connect to the computer jack under the dash and reset factory functions like that. Pain in the tush if you are changing your own oil. Mechanics and dealers have the equipment to do that reset.

May 20, 2010 | 2006 Chevrolet Silverado 3500

2 Answers

I have a pontiac g6 and my change oil light has been on. i went and got a oil change and nothing happened and i cant see where to put the tRANSNISSION FLUID??


With the "CHANGE OIL SOON" message displayed, press any of the three DIC buttons to clear the "CHANGE OIL SOON" message. Display "OIL LIFE RESET" on the DIC. Press and hold the "ENTER" button for at least one second. An "ACKNOWLEDGED" display message will appear for three seconds or until the next button is pressed. This will tell you the system has been reset. Turn the ignition to "OFF". If the "CHANGE OIL SOON" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. on the 3.5 liter you have a dipstick near fire wall

Jun 13, 2009 | 2006 Pontiac G6

1 Answer

MESSAGE BOARD RESET


TURN ON THE IGNITION WITHOUT STARTING THE TRUCK, AND FULLY DEPRESS THE ACCELERATOR THREE TIMES WITHIN FIVE SECONDS. TURN OF THE IGNITION AND THEN START. THIS SHOULD CLEAR THE MESSAGE. IF IT DOESN'T THEN REPEAT. HOPE THIS HELPS. LET ME KNOW. THANKS FOR USING FIX-YA.

May 06, 2009 | 2001 GMC Sierra 2500HD

2 Answers

Ac Light stays on how to get turned off


Now you see why we get paid the big bucks!
Just kidding,LOL
Here is the sequence:

1. Press the STATUS control to
access the System Check function,
the message center will display A/C
FILTER XXX% RESET FOR NEW.
2. Press and hold the RESET
control to set to 100%, the message
center will display IF NEW FILTER
HOLD RESET.
3. After a successful reset, the
message center will display A/C
FILTER LIFE SET TO 100%.

Mar 03, 2009 | 2004 Lincoln LS

1 Answer

Change engine oil message stays on


the Change Engine Oil message is diplayed in the driver information center when the oil change is due ,,,,, to RESET display message , press the INFO button to display the ENGINE OIL LIFE message , ,, Press and Hold the RESET button untill 100% ENGINE OIL LIFE is displayed.

Dec 23, 2008 | 2001 Cadillac DeVille

Not finding what you are looking for?
2002 Lincoln LS Logo

Related Topics:

1,192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...