SOURCE: CRANK SHAFT POSITION SENSOR 20002 NISSAN ALTIMA
1st, Nissan had a recall on Crank position sensors for 2002-2006 Altima's. Check with you dealer before you go doing any repairs. You may discover you can get your car repaired at no charge.
NHTSA Campaign ID number :O7V527000
Symptom: Erratic behavior. Stalling and no starts and very difficult to diagnose due to the time frame in which the component actually malfunctions. The warranty should not be limited to the original owner.
I would also need more specifics as to which engine you have so I might assist you in where the location of the sensor is. The Altima had a 4 and a 6 cyl engine offered that year.
SOURCE: How to replace knock sensor in 1995 NISSAN ALTIMA?
Remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housing once you have remove all the above, your engine will look naked, you can see the location of the knock sensor is locate in the engine valle.
SOURCE: 2005 nissan altima won't start, clicking noise is heard
It sounds like your battery is dead. You may be able to fix this with a jump start if you left your lights on over night. If a good jump does not work it may be your starter. but you should start with the simple and cheap solution first. Try having someone jump start your car.
144 views
Usually answered in minutes!
and you change the battery to charge the battery of another car comes on and then goes off after trbaja well and turns back
×