Question about Cars & Trucks

1 Answer

My 1998 Chevy Ventrue driver side window goes up crooked.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 513 Answers

THE WINDOW IS OFF THE TRACK.THIS INVOLES REMOVING THE DOOR PANEL TO GET TO THE TRACK . UNLESS YOU ARE VERY MSURE OF WHAT YOU ARE DOING I SUGGEST YOU SEE YOUR REPUTABLE AUTO TECH .THE SPRING ON THE REGULATOR IS UNDER PRESSURE AND IF YOU ARE NOT CAREFUL YOU COULD INJURE YOURSELF. THIS IS NOT A NOVICE REPAIR HOPE THIS HELPS BILL

Posted on Dec 11, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 521 Answers

SOURCE: 2000 Dodge Dakota power window on driver side

the regulator assembly or even one of the tabs on the window that attaches to the regulator has broken. it can be a self repoair but if the glass broke then let the glass company do it.

Posted on Aug 05, 2009

ZJLimited
  • 17970 Answers

SOURCE: 2000 Saturn SL2 driver's side

Fore remove the door panel in a SL2, you have to take off the door handle. You have to disengage the door locking mechanism from the door handle, then unscrew the panel and take it off.

The door handle unhinges from the locks and from the window controls. If your windows are electric, just unsnap the cord attached and leave it hanging out.

You may have to work with the door handle as it won't come out of the slot very easily and you don't have a lot of room. A flat bladed screwdriver with a long metal piece should work to unsnap it.


ION, L-Series, S-Series 1999-2005 - Window Systems

Door Glass & Regulator
Power Windows
Diagnosis & Testing
Driver's Window Switch

  1. Turn the ignition OFF, disconnect the harness connector at the driver window switch.
  2. Test for infinite resistance between the signal terminals A and B and the B+ circuit terminal E with the passenger window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  3. Test for less than 2 ohms of resistance between the signal terminal A and the B+ circuit terminal E with the passenger window switch in the UP position. If greater than 2 ohms, replace the driver window switch.
  4. Test for less than 2 ohms of resistance between the signal terminal B and the B+ circuit terminal E with the passenger window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
  5. Test for infinite resistance between the signal terminals F and H and the B+ circuit terminal E with the driver window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  6. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal E with the driver window switch in the UP position. If greater than 2 ohms, replace the driver window switch
  7. Test for less than 2 ohms of resistance between the signal terminal H and the B+ circuit terminal E with the driver window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
Passenger's Window Switch
  1. Turn the ignition OFF, disconnect the harness connector at the passenger window switch. Test for infinite resistance between the signal terminals G and F and the B+ circuit terminal with the switch in the INACTIVE position. If less than infinite resistance, replace the switch.
  2. Test for less than 2 ohms of resistance between the signal terminal G and the B+ circuit terminal with the switch in the UP position. If greater than 2 ohms, replace the switch.
  3. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal with the switch in the DOWN position. If greater than 2 ohms, replace the switch.
Window Motor
  1. Install a 30-amp fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The motor should perform the UP or DOWN function.
  2. If the function does not perform as specified, replace the motor.
  3. Reverse the jumper wires; the motor should perform the DOWN or UP function.
  4. If the function does not perform as specified, replace the motor.
Removal & Installation
Window Motor & Regulator
  1. Raise the window to the full UP position.
  2. Remove the upper trim panel.
  3. Remove the manual window regulator handle, if equipped.
  4. Remove the power door lock switch, if equipped.
  5. Remove the pull cup assembly.
  6. Remove the door trim push-in retainers.
  7. Remove the screw from the trim panel.
  8. Pull the bottom of the door trim out to disengage the clips.
  9. Lift up on the door trim panel to disengage the inner belt molding from the door flange.
  10. Remove the door trim panel.
  11. Remove the radio speaker.
  12. Remove the front door water deflector.
  13. Disengage the door glass to the regulator sash channel clips. Separate the door glass from the sash channel.
  14. Push the window to the up position and tape in place.
  15. Loosen the power window regulator bolts.
  16. Remove the rear regulator bolt.
  17. Lift the window regulator, disengaging the loosened bolts from the door.
  18. Disconnect the regulator electrical connector.
  19. Remove the power window regulator from the door.
To install:
  1. Installation is the reverse of removal.
Window Switch
  1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs.
  2. Press the locking tab to remove the switch from the door trim panel.
  3. Disconnect the electrical connector.
  4. Remove the switch.
To install:
  1. Installation is the reverse of removal.

I hope helped with this; good luck.

Posted on Oct 21, 2009

  • 1810 Answers

SOURCE: 2003 Chevy Tahoe. Driver's side power window

check releys and wires in door jam 1 might be broken failing that u need a new switch

Posted on Jan 13, 2010

wyno62
  • 364 Answers

SOURCE: drivers window goes up crooked and not closing

This can be 3 things wrong, either way the inside door trim panel has to be removed to inspect, 1} the glass has broken away from the glue holding it to the frame, 2} the mechanism has lost or has loose bolts holding it to the frame, 3} the mechanism is beyond economical repair and you need to replace the mechanism. Sorry I can't pinpoint it without seeing it, Remember to leave 4 thumbs up for this answer. We try to help as best we can, safe driving.

Posted on Jan 20, 2010

  • 10 Answers

SOURCE: how do I remove drivers side door panel on 1998

i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda accord window goes up crooked


Do you hear alot of rattling when driving from the window? what about if that window is only rolled down half way?rattling more than any other window? The rubbers that hold the window in place may be worn allowing the window to move around in the space between the door. You should get it looked at by a mechanic before it completely falls into the frame of the door

Apr 14, 2013 | 1997 Honda Accord

1 Answer

How much does a window regulator cost


try checking scrap yards they should be able to get one in good condition for $75

Feb 28, 2013 | 2004 Subaru Forester

1 Answer

1998 chevy cavalier horn goes off by itself


If your horn goes off by itself and won't stop there is a fuse on the driver side panel by the wheel,open it up,and looked at the back side of the panel and take out the one marked cig. It will stop it from happening the horn is connected to the cig lighter.

Apr 08, 2012 | 1998 Chevrolet Cavalier

1 Answer

Where is the fuse box located in/on a 1998 chevy calvalier?


Sir: I have a 1998 Cavalier. The fuses are located at the end of the dash on the drivers side, where the driver's door goes up against the dash when you close it. The plastic panel has a little notch to pull it open. Its molded into the plastic... "Fuses". Glad to be of help.

Nov 06, 2011 | 1998 Chevrolet Cavalier

1 Answer

The passenger side power window will not roll back up no my 2001 chevy ventrue all other windows and lights are working fine.


Make sure you have voltage going to the switch. Then make sure you have voltage going to the motor in the door. If you have voltage in both place you will need to replace the window lift motor.

May 17, 2010 | 2001 Chevrolet Venture

1 Answer

Drivers window goes up crooked and not closing properly 1998 buick park ave. motor works fine . going down is working proper.. going up is when the window goes up crooked. motor works very good


This can be 3 things wrong, either way the inside door trim panel has to be removed to inspect, 1} the glass has broken away from the glue holding it to the frame, 2} the mechanism has lost or has loose bolts holding it to the frame, 3} the mechanism is beyond economical repair and you need to replace the mechanism. Sorry I can't pinpoint it without seeing it, Remember to leave 4 thumbs up for this answer. We try to help as best we can, safe driving.

Jan 07, 2010 | 1998 Buick Park Avenue

2 Answers

2000 Dodge Dakota power window on driver side


the regulator assembly or even one of the tabs on the window that attaches to the regulator has broken. it can be a self repoair but if the glass broke then let the glass company do it.

Aug 05, 2009 | 2000 Dodge Dakota Quad Cab

2 Answers

The power window on the driver side is not working -


Stuck up or down? Or, does it look "crooked" in the frame?

Dec 16, 2008 | 2002 Chevrolet Venture Passanger

1 Answer

1998 pontiac grand am drivers side window


sounds like you over look the pastic retainer clips in window seal part #
38480 rockauto.com or gm dealers usualy keep this on hand

Jun 13, 2008 | 1998 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...