Question about 1994 Suzuki Swift
I don't know how to change rear light bulbs on 1990' suzuki swift
Usually just pull back trunk mat from back side of trunk where the latch is you should see plastic clips they turn to the left to remove install new bulb and push back in clockwise to lock
Posted on Dec 11, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Suzuki swift Headlight problem
Have you checked to see if this is a wiring problem or maybe a relay problem?
Recently my lights would work on side lights and not anything else and this was down to dodgy wiring and needed a new relay unit.
Posted on Jul 28, 2008
in the engine bay above the battery from memory is the fuse box for the main fuses & relays they should be marked on top of case one is for the fule pump.
Posted on Jan 18, 2009
At the rear of the headlight under the hood, you will see the nylon bulb holder. Squeeze the tab to unlock it, and turn it counterclock wise. Pull it out, and, with out touching the bulb with naked fingers, pull the old bulb out, and put the new one in. The natural oil on your fingers, the stuff that makes finger prints, will cause the bulb to fail prematurely, so, use a paper towel or gloves to handle the new bulb.
Posted on Jul 11, 2009
1) With the vehicle jacked up and supported with axle stands, remove the rear wheels.
2) Using an old, thin, flat tip screwdriver and a hammer, remove the dust cap from the brake drum.
3) Using a 1/8" punch and hammer, tap out the lock nut indentation.
4) Using a 30mm, 1/2" drive socket and ratchet, unscrew the lock nut from the axle shaft.
5) Remove the flat washer from the axle shaft.
6) Ensure the hand brake is not applied.
7) Using a soft faced hammer, strike the outside edge of the drum repeatedly and all around while at the same time applying a pulling force on the drum. (This is best accomplished using two people and could take several minutes.) Be persistent!
8) Once the drum has been removed, tap or press out the wheel bearing from the inside out.
9) Clean and re-pack the wheel bearing with grease.
Posted on Nov 18, 2009
Testimonial: "thanks mate i appreciate the speedy reply"
Tips for a great answer:
Feb 14, 2013 | 1994 Suzuki Swift
Sep 27, 2012 | 1991 Suzuki Swift
Nov 18, 2011 | 1994 Suzuki Swift
Feb 11, 2011 | 2006 Suzuki Swift
Mar 26, 2010 | 1989 Suzuki Swift
Jan 17, 2010 | 1999 Suzuki Swift
Jul 11, 2009 | 1996 Suzuki Swift
223 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: