Question about 2001 GMC Sierra 1500HD
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley hope this helps u might wnat to google knock sensor so u knoe what it looks like
Posted on Feb 19, 2010
Wheel speed sensors misadjusted, damaged , or metal shavings and other debree, since they are magnetic can give false readings from one of the wheel circuits. Over sized tires can give of false speed readings as well. there are many other causes including bad relay, control module, e.t.c. It is best to have the proper scan tool to diagnose an ABS problem
Posted on Jul 09, 2009
it is decieving. if the tensioner has an extension of about two inches from the base, it takes a 15 mm to lift it, be easy, make sure the wrench is not going to touch anything as you release it after taking the belt off
Posted on Sep 18, 2009
if you just changed the alternator you should do the belt too,if you get your belt from Auto zone or NAPA the belt routing is on the back of the package
Posted on Dec 09, 2009
Look for the belt tensioner pully. If you don't know what this is run the engine and look at the pullies.The one you want is the only one that will be moving up and down.This is the one that is spring loaded.Think it is drivers side top.It may have a square hole in the arm to put a ratchet in.Thinking 3/8" drive but may be 1/2" ,if there is not a hole then you will need a socket that fits on the center bolt of the pully.I will suggest a long handled ratchet or breaker bar,if you don't have one you can put a pipe over the handle of a short handle."cheater pipe"Put force on it so the pully comes up off the belt.If you don't have a belt routing sticker still on your radiator shroud draw one before you remove it.I think the belt comes off on the drivers side.when putting on the new one start at the crank pully,around the waterpump,then to all pullys on passinger side.The last one will be the alternator.Hold the belt down in front of the tensioner pully attach the ratchet and pull until you can slip the belt under the pully,Make sure the belt is properly seated in all pullys before starting.Helps if you have a spare set of hands.
Posted on Jan 07, 2010
Tips for a great answer:
Jan 25, 2015 | 2002 GMC Sierra 2500HD
Jan 20, 2015 | 2005 GMC Sierra 2500HD 4WD
Nov 12, 2014 | 1989 GMC Sierra
Apr 02, 2017 | 2001 GMC Sierra 2500HD
Jan 06, 2011 | 2001 GMC Sierra 1500HD
Feb 19, 2010 | 1999 GMC Sierra
Sep 17, 2009 | 2001 GMC Sierra 1500HD
201 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: