Question about 1997 Toyota Camry
How to change the vehicle speed sensor on 1997 toyota corolla
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The VSS (Vehicle Speed Sensor) is mounted on transaxle and contains a three pin electrical connector. Remove necessary components for access to VSS. Disconnect electrical connector at VSS...
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Posted on Jun 22, 2012
For the 1997 Toyota Camry 3.0L EFI
DOHC 6cyl the Vehicle Speed Sensor located
mounted on transmission.
Check this pic as reference...
Hope this help (remem,ber rated this post).
Posted on May 07, 2010
i have a 97 corolla as well, and i've changed the radio out several times on my own. if you take a small screwdriver and stick it in between the panel that goes around the around the area where the radio is, u should be able to pry it off relatively easy. just be sure to remove the sliders off the AC controls before you do. after you pop that panel off, you just have to disconnect the wiring harnesses going to the clock, hazard lights, rear defroster, and AC button. the radio is bolted in there with a mounting bracket, so you'll have to unscrew that as well. you'll need to unscrew that bracket from the radio you have in there, and mount it to the one you wanna install....hopefully this helps you out. it sounds harder than it really is.
Posted on Sep 17, 2008
Are you one of those people who TOP OFF the tank when filling up?
When the EVAP recovery system soak with few ounce of gasoline......the trap vapor will take few days escape.
EVAP system is design to handle fuel vapor. Few ounce of gasoline can damage the fuel vapor recovery relay and decrease the service live of the recovery lines.
You can accelerate the process by locating the charcoal canister (near the nose of the car and same side as your gas filler door)
MOVE the car to outdoor.
Disconnect the EVAP line and let it air out by itself.
DO NOT introduce any heat source or fan to speed up the process.
Reconnect this EVAP hose and use a small amount of starting fluid at the intake manifold.
Please post more information by Clicking on the comment link.
I will follow up.
Posted on Dec 03, 2009
Tips for a great answer:
Sep 29, 2014 | 1994 Toyota Corolla
Feb 13, 2014 | 2001 Toyota Corolla
Aug 25, 2012 | 1997 Toyota Camry
Jul 13, 2012 | Toyota Corolla Cars & Trucks
Sep 15, 2010 | 1998 Toyota Corolla
May 07, 2010 | 1997 Toyota Camry
Mar 19, 2010 | 1997 Toyota Corolla
3,535 people viewed this question
Usually answered in minutes!