Question about 1995 GMC Sierra
Heatercontrol gets stuck on hot
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 93 gmc sierra heater not working
THERMOSTAT REPLACE IF NOT SEE IF HOSES ARE CLOGGED SHOT OF AIR COULD HELP OR DISSCONNECT BATTERY CABLE 10-15 MIN CONNECT BACK TRY HEATER
Posted on Jan 04, 2009
your heat/cool and vent selection options are controlled by engine vacuum through small clear tubes attached to the rear of your climate control interface. Other vehicles have small steel pull wires that operate the desired changes. You might try removing the trim and any fasteners affiliated with the interface/console. GENTLY pull outward and look to see if any of these tubes are pulled off or cut/damaged. Did anyone recently install a new stereo in the vehicle? If so, the vacuum tubing and or pull wires that change your outlets could have been damaged when the stereo unit was pushed into place. Hope this helps
Posted on Sep 09, 2009
Testimonial: "Very good information. THANKS!"
Defrost is the default position. Is the control a autyomatic temperture control unit? ( you set the temp and select automatic) if it is the system is completely electronic. You push the buttons and the control still says defrost or can you select something else and the control shows it but it just keeps coming out the defrost? If the control changes and the air comes out the defrost anyway and the cheack engine light isn't on, then the problem can be blown fuses or an air door actoater not working. Does the dash emit a clicking sound? if it does with the covers off the bottom of the dash reach around touching the different pieces till you touch the idem that is clicking. this is an acutor motor, or blend door motor. they have gears in them that wear out and break the motors aren't repairable and you just replace the ofending motor. the door that is moves can be stuck. and may have to be freed up with blaster, WD40, or other rust buster till it moves easy. maybe after getting the door to move smoothly you can get the old motor to move the door wiithout having to install a new one.
Posted on Jan 06, 2010
Tips for a great answer:
Jan 06, 2015 | 2005 GMC Sierra
Apr 13, 2014 | 1995 GMC Sierra C1500
Apr 17, 2017 | 1997 GMC Sierra
Mar 09, 2013 | 1997 GMC Sierra
Jun 04, 2012 | 1995 GMC Sierra C1500
Jun 03, 2011 | 1991 GMC Sierra
Feb 20, 2010 | 2001 GMC Sierra C/K3500
Jan 30, 2010 | 2000 GMC New Sierra 1500
Jan 07, 2010 | 2005 GMC Sierra
Oct 01, 2009 | 2000 GMC New Sierra 1500
Jun 24, 2017 | 1995 GMC Sierra
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: