Question about 2005 Cadillac CTS

Open Question

Replace rear wheel stud on cts 2005

Replace studs

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: cadilac cts

The black plastic grille around the fog lamp can be removed without tools. If you look through the slats, you'll see 5 or 6 "clips" that can be GENTLY released with your finger. Once the grille is out (which is about 4 inches high by about 14 inches long), you'll see that the fog lamp assembly can be removed with 3 screws. Simpler than you probably thought!

Posted on Jul 02, 2008

Ad
  • 137 Answers

SOURCE: studs on the waterpump are free spining...

those a pressed in the sheet metal cover.. you can try to put pressure on the water pump pry it away slightly and then use a air rachet if you have one available.. that should work for you ..

Posted on Feb 19, 2009

  • 117 Answers

SOURCE: Replace 2005 Cadillac CTS water pump

drain the coolant.remove belt by rotating belt tensioner cllockwise. water pump pulley will require a holding tool to keep it from turning while removing bolts. access to air ratchet can sometimes eliminate the need to hold but be careful cause thats a good way to skin some knuckles. also make installation more difficult to obtain proper torque. after pulley is off just a few water pupm mounting bolts remain. clean and dry gasket surface very well before reinstalling.

Posted on Nov 07, 2009

Testimonial: "Very quick with a response, and good info!"

  • 15756 Answers

SOURCE: put studs on rear wheel 2005 cts cad

Are you asking about the lug nut studs? If so there is enough clearance behind the hub to drive the broken on out and insert the new one. When you tighten the lug nuts it will pull the stud into the hub and seat it .

Posted on Jan 28, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put lug studs on a 2005 cts cad rear wheel


They clear between the hub and housing after you drive the broken ones out. pull them tight with lug nut

Jan 28, 2017 | Cars & Trucks

1 Answer

Put studs on rear wheel 2005 cts cad


Are you asking about the lug nut studs? If so there is enough clearance behind the hub to drive the broken on out and insert the new one. When you tighten the lug nuts it will pull the stud into the hub and seat it .

Jan 28, 2017 | Cadillac CTS Cars & Trucks

1 Answer

How to replace a rear wheel stud


remove the wheel
using a hammer and punch knock the broken stud out
fit the new stud from behind use over size nuts as spacers fit the stud nut and apply tension
using the hammer and punch from the rear on the head of the stud knock it in as you keep the tension on the stud nut
keep the process going until the stud is fully seated on the head of the stud

Jul 10, 2014 | 2005 Toyota Camry Solara

1 Answer

2001 altima replacing rear wheel stud


strip it down to your hub the hub holds the studs .it is a push pull fit .but an old nut on it.then hit the top of it .it when then push in.remove the nut. push in the new stud from the rear of the hub.put a larger nut on top of stud ,then your wheel nut to pull the stud into the hub.then remove the wheel nut .then refit the parts taken off.and fit your wheel.

Dec 30, 2013 | 2005 Chrysler PT Cruiser

3 Answers

How to change broken stud on rear axle 1997 ford explorer


I am assuming you are talking about a wheel lug stud. The lug studs are pressed in from the inner side of the drum or rotor or axle flange depending on how your vehicle is equipped. You have to remove the wheel and drum or rotor to get access to the back side. Drive the broken stud out from the front after you have removed the drum or rotor and set the new one in from the back and tap it into the hole until set as the rest are. If you cant get it set all the way you can finish setting it by pulling it into place when you tighten the lug nuts on reassembly. The part should be under $10.00

Nov 18, 2010 | 1997 Ford Explorer AWD

1 Answer

How do u fix a rear stud on a 1999 Nissan Maxima


You will need to remove the Rear Wheel, Brake Caliper, and Rotor to replace the Stud. Once those are removed, take a Hammer and hit the Wheel Stud from the front to drive the Stud out through the back of the Wheel Hub. Once the Stud is out, take the new Stud and insert it in the Hub from the back. You will need to get a Open Ended Nut with the proper thread size as the Stud and thread it on the Stud, and tighten the Nut till the Stud comes all the way through the hole and the end of the Stud is flush with the back of the Hub. Remove the Nut and you can now put everything back together.

Jul 15, 2010 | 1999 Nissan Maxima

1 Answer

Need to replace rear wheel stud


hello. Here is a link to explain step by step how to remove that stud. Joe http://www.ehow.com/how_5484703_remove-broken-wheel-studs.html

Apr 22, 2010 | 2005 Suzuki Verona EX

2 Answers

Change rear wheel stud


HELLO THERE:
WHEEL STUDS ARE PRESSED INTO THE WHEELS OR DRUMS BY A HYDRAULIC PRESS AND THEY CAN BE REMOVED THE SAME WAY OR THEY CAN BE REMOVED BY USING A SPECIAL SOCKET AND A SLEDGE HAMMER THEY COST ABOUT 3 TO 7 DOLLARS A SET OF 2 AND CAN BE BOUGHT AT ANY PLACE THAT SERVICES WHEELS AND DRUMS OK
hOPE THIS IS VERY HELPFUL FOR YOU
BEST REGARDS MICHAEL

Apr 14, 2010 | 1994 Mitsubishi Diamante

1 Answer

I need to replace the rear lugs on a 2005 caravan with drum brakes. I can't figure out how to get enough clearance for the lugs to come all the way out.


Start all the wheel studs into place with a hammer and a punch,then you need to find a wide nut that will go over the stud threads without touching them and then put a wheel nut on the stud.Crank the nut down and the stud will pull into place as the nut gets tightened up,use an impact gun if you have one.If you just can't get the studs out,then turn the stud to a place where it has room to come out and beat it out with a heavy hammer,then draw the new ones in as described.

Apr 06, 2010 | 2005 Dodge Caravan

1 Answer

Broken rear wheel stud on a 2005 ford focus zx4 se


  1. Step 1 Buy a new stud. Make sure you purchase the right size. If you're not sure what size to get, wait until you remove the stud and take it with you to the store.
  2. Step 2 Check the area of the spare tire in the trunk for the jack and the jack tools since you'll need to raise the car to replace the wheel stud on your Focus. Be sure to block the tire diagonal to the jack.
  3. Step 3 Use the jack to raise the Focus. Remove the wheel Take off the caliper and either hang it by a mechanics wire or lay it up so it doesn't dangle by the brake line. Remove the rotor. If you're working on back wheels, you have to remove the emergency brake clip first. You could have drum brakes in the rear. If they're drum brakes, remove the drum.
  4. Step 4 Hunt for an opening behind the hub that allows you to remove the stud. Line the stud up with the hole. You may have to take off the hub and put it in a vise if you can't drive it out the back.
  5. Step 5 Hit the stud with a mallet and drive it out the back of the hub. Push another stud into the opening. This is tough work, but you only need to push it far enough to thread on a wheel bolt.
  6. Step 6 Put on a wheel bolt and begin to tighten it. As you do, the stud starts to pull through. Add more bolts as necessary until you seat the stud. Check in the back of the hub. When the head is flush with the stud, you seated it.
  7. Step 7 Remove the extra bolts and reassemble the parts that you took off to replace the wheel stud on the Ford Focus. Put the wheel back on the vehicle and tighten down the wheel nuts.

Sep 25, 2009 | 2005 Ford Focus

Not finding what you are looking for?
2005 Cadillac CTS Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...