Air bag light on a 2008 Lexus es350 - 2007 Lexus ES 350

SOURCE: How do I replace the cabin air filter for a 2007

the cabin filter is locate on the passanger in the glove box. to get to it u must remove the shelf in the glove box by simply tugging it from the left side, then u will see at the back of the glove box a section that u can remove. once removed u will see a white compartment with a removable front, remove that and youll see filter

SOURCE: air bag light is still on even after resetting it by computer!

Your sensor is out car was in wreck and they never replace the sensor after fixing it

SOURCE: 2007 es350 lexus. stopped for gas. when ready to

most likely your key battery needs to be replaced. due to the involvment of the key, it uses alot more battery power then older cars and the battery should be replaced every year. hope that helps.

SOURCE: 2007 Lexus 350 - How to change the air filter

Jim , you can change both the air and cabin air filters. There are a series off pop pins covering the air intake. If you depress the center button with a BIC pen tip and then lift at the side they will pop up. They are a plastic spring load so be gentle.
Underneath you will find the intake housing and filter. Cabin air filter should be behind the glove box area I
believe .
FYI , Lexus has a patented high volume oil filter. If you change your own , stcik with genuine for longer life, unless you are certain the aftermarket matches

SOURCE: 2007 Lexus ES350. Mater Warning Light is activated

if you do not have navigation system.

1. Turn the engine switch OFF..
2. While pressing the trip meter reset button, set the engine switch to IG-ON mode. Continue to press and hold the knob until the trip meter displays 000000.

1. Push the "INFO" button
2. Touch "Maintenance".
3. Touch the desired button Delete All : To cancel all conditions which have been input. Reset All : To reset the item which has satisfied a condition. If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on. If "OFF" is selected, the "Information" screen is disabled.
4. Input the conditions. Notice of Date : The next maintenance date can be input. Notice of Distance : The driving distance until the next maintenance check can be input. "Delete" : To cancel the date and distance conditions. "Reset" : To reset the date and distance conditions.
5. Touch "OK" The screen returns to the "Maintenance screen.