Question about Jeep Cars & Trucks
When you go to open glove box door fell off,,
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.
Posted on Nov 02, 2008
assuming that this jeep has not been wrecked recently, the only way to get that door open is to remove the door panel while the door is closed, at least enough to reach the door latch inside the door, once reached you can operate it and release it to open the door, I will tell you that the likely hood of damage to the door panel will probably occur, I have had this problem before and I had to cut a hole in the panel reach in and open the door, sorry it can't be simpler. if you feel the latch operating and you have recently ran into something, try pull the door handle from inside while pushing the door open
Posted on Mar 24, 2009
I have a 97, and my fuse for that is behind the glovebox. Open the box, slide the end of the strap to disconnect it, then remove the box. The fuse is marked. Something like "Dome lt. elim." I think it's located one up from the bottom right. This can actually be done without removing the glove box. For a more permanent fix, quadratec.com has a switch that plugs into the fuse location and mounts under the dash, so you can just flip the switch. Hope this helps.
Posted on Jul 14, 2009
if its in the way yes...But the resistor is usually mounted within the blower motor box. Wires powering up the blower motor is coming from the resistor. Follow those lines!!
Posted on Dec 13, 2010
Tips for a great answer:
Feb 09, 2017 | 2000 Jeep Wrangler
Dec 13, 2016 | 2005 Jeep Wrangler
Feb 09, 2015 | 2002 Jeep Wrangler
Dec 13, 2010 | 2000 Jeep Wrangler
Sep 14, 2010 | 2004 Jeep Wrangler
Aug 11, 2010 | 1997 Jeep Wrangler
Jul 16, 2010 | 2006 Jeep Wrangler
Jun 28, 2009 | 2000 Jeep Wrangler
Jan 11, 2009 | 1994 Jeep Wrangler
71 people viewed this question
Usually answered in minutes!