Question about 2006 Suzuki Forenza
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here's a PDF containing more information than any normal human could possibly ever need for that transmission:
Good luck, I hope this helps!
Posted on Feb 25, 2010
SOURCE: Changing the transmission fluid
Once you've drained the transaxle by removing drain plug, re-install drain plug and torque to mfg. specs. To fill transaxle, you need a 5/8" square drive attached to a 9" extension, breaker bar or ratchet. Raise vehicle on hoist, or jack up and secure with jackstands. The fill plug is located above and slightly to the right of the location where the passenger side c.v. halfshaft enters the transaxle. Remove fill plug. Using a fluid exchange tool available at your local parts store, fill with automatic transmission/transaxle fluid available only from a Suzuki dealership, (part# ESSO LT 71141) until fluid starts to run out of fill hole, then replace fill plug, and torque to manufacturer specifications. I'm a former Suzuki technician. I hope this was helpful.
Posted on Mar 05, 2010
there is no dipstick stupid suzuki the only way to check trans fluid is to crawl under the car and remove the filler plug from the transmission check to make sure the fluid is to the brim of the hole there is a diagram in the manual page 5-11 hope this helps
Posted on Oct 10, 2009
Right on the transmission, to the right side of the engine bay as you are looking down on it. It is a black plastic part that is bolted on the transmission with two 10mm bolts, and connected to the transmission with rod and clip. It is partially obstructed by the radiator hose, but otherwise really easy to get to.
Posted on Jan 28, 2010
You do not need to "calibrate the computer" when changing the trans. range sensor. If the dealer is telling you this, it is because they want more of your money. Just buy the sensor.
Posted on Feb 15, 2010
Tips for a great answer:
Jun 30, 2017 | Suzuki Cars & Trucks
Sep 06, 2016 | 2005 Suzuki Forenza
Feb 24, 2015 | 2006 Suzuki Forenza
Sep 23, 2013 | 2004 Volvo XC90
Sep 15, 2011 | 2004 Suzuki Forenza
Feb 08, 2011 | 2004 Suzuki Forenza
Oct 31, 2010 | 2006 Suzuki Forenza
Jul 20, 2010 | 2005 Suzuki Forenza
Mar 10, 2010 | 2006 Suzuki Reno
Sep 26, 2009 | 2006 Suzuki Forenza
532 people viewed this question
Usually answered in minutes!